[1]陈扼西,冯培锋,龚志坚,等.一种装载机工作装置电比例操纵器的研制[J].华侨大学学报(自然科学版),2005,26(2):176-179.[doi:10.3969/j.issn.1000-5013.2005.02.017]
　Chen Exi,Feng Peifeng,Gong Zhijian,et al.Development of an Electric Proportional Joystick for the Use of Loader’s Working Devices[J].Journal of Huaqiao University(Natural Science),2005,26(2):176-179.[doi:10.3969/j.issn.1000-5013.2005.02.017]
点击复制

一种装载机工作装置电比例操纵器的研制()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第26卷
期数:
2005年第2期
页码:
176-179
栏目:
出版日期:
2005-04-20

文章信息/Info

Title:
Development of an Electric Proportional Joystick for the Use of Loader’s Working Devices
文章编号:
1000-5013(2005)02-0176-04
作者:
陈扼西; 冯培锋; 龚志坚; 叶连福
集美大学机械工程学院; 厦门奥伦控制工程有限公司 福建厦门361021; 福建厦门361021; 福建厦门361012
Author(s):
Chen Exi1;  Feng Peifeng1;  Gong Zhijian1;  Ye Lianfu2
1.Institute of Mechanical Engineering, Jimei University, 361021, Xiamen, China;
关键词:
装载机;  操纵器;  传感转换;  电比例控制
Keywords:
loader;  joystick;  sensing and transducing;  electric proportional control
分类号:
TD421.7
DOI:
10.3969/j.issn.1000-5013.2005.02.017
文献标志码:
A
摘要:
基于装载机工作装置电液比例先导操纵控制的原理,并考虑其实际工作环境,以可靠性高的涡流式电感传感器为电比例传感转换元件,进行电比例操纵器的方案、结构设计.通过操纵器研制、实验和装载机的装机测试,表明该操纵器能输出所需要的操纵控制电信号.经控制器处理后,可满足装载机工作装置电液比例先导操纵控制对前端装置的要求.
Abstract:
Based on the principle of electro-hydraulic pilot-control for loader’s working devices, the authors carry out a design of electric proportional joystick including structural plan and details. The joystick is designed by taking an eddy type inductance sensor with high reliability as electric proportional element on sensing and transducing. It is designed by taking practical work environment into consideration. As shown by development and experiment of joystick and by installing and testing of loader, this joystick is able to send out electric signals needed in operation control, it will meet the requiremens by electrohydraulically proportional pilot control for the front-end device.

参考文献/References:

[1] 黄宗益. 工程机械机电一体化、机器人化 [J]. 中国机械工程, 1996(3):64-66.
[2] 杨力夫. 装载机工作装置电液比例控制系统 [J]. 工程机械, 2002(1):1-81.doi:10.3969/j.issn.1000-1212.2002.04.001.
[3] 石峰, 曹开明. 6BFK12/24型电液比例控制的研制 [J]. 有色金属, 2000(3):15-17.doi:10.3969/j.issn.2095-1744.2000.03.004.

相似文献/References:

[1]蔡应强,陈清林,丁旭光.轮式装载机前车架的有限元分析与结构优化[J].华侨大学学报(自然科学版),2016,37(1):27.[doi:10.11830/ISSN.1000-5013.2016.01.0027]
　CAI Yingqiang,CHEN Qinglin,DING Xuguang.Finite Element Analysis and Structural Optimization of the Front Frame of Wheel Loader[J].Journal of Huaqiao University(Natural Science),2016,37(2):27.[doi:10.11830/ISSN.1000-5013.2016.01.0027]

备注/Memo

备注/Memo:
福建省科技计划课题基金资助项目(2001H026)
更新日期/Last Update: 2014-03-23