[1]刘建春,张奕鑫.X8120数控改造的硬件设计[J].华侨大学学报(自然科学版),1998,19(1):61-64.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
　Liu Jianchun,Zhang Yixin.Hardware Design for Reconstructing Milling Machine X8120 into One of Numerical Control[J].Journal of Huaqiao University(Natural Science),1998,19(1):61-64.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
点击复制

X8120数控改造的硬件设计()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第19卷
期数:
1998年第1期
页码:
61-64
栏目:
出版日期:
1998-01-20

文章信息/Info

Title:
Hardware Design for Reconstructing Milling Machine X8120 into One of Numerical Control
作者:
刘建春; 张奕鑫
鹭江大学机械工程系; 华侨大学机电工程系
Author(s):
Liu Jianchun;  Zhang Yixin
关键词:
单片机;  数控;  模块化设计
Keywords:
single chip microcomputer;  numerical control;  modular design
分类号:
TG547; TG547
DOI:
10.11830/ISSN.1000-5013.1998.01.0061
摘要:
对普通万能工具铣床X8120进行经济型数控改造,开发以8032单片机为核心的经济型铣床数控系统.本系统由上、下位机组成.上位机为486计算机,采用Windows软件通过RS232串行通讯管理多台下位机; 下位机硬件采用STD总线及模块化设计,系统维护和功能扩充方便.并从软硬件着手进行抗干扰设计,性能可靠,实验表明提高了加工速度和加工质量.
Abstract:
For reconstructing the common universal tool milling machine X8120 into an economic one of numerical control,a numerical control system with 8032 single chip microcomputer as its core is developed for the use of this economic milling machine.The system co

相似文献/References:

[1]张秋凝.单片机开发装置[J].华侨大学学报(自然科学版),1989,10(1):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
　Zhang Qiuning.Single Chip Computer Developing Set[J].Journal of Huaqiao University(Natural Science),1989,10(1):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
[2]郑耀林.车床加工工件线速度的单片机检测显示装置[J].华侨大学学报(自然科学版),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
　Zheng Yaolin.A Single Chip MicrocomPuter-Operated Device for Detecting and Displaying Linear Velocity of Workpiece on a Lathe[J].Journal of Huaqiao University(Natural Science),1991,12(1):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
[3]梁天德,黄传明.单片机测速仪的设计和研制[J].华侨大学学报(自然科学版),1992,13(3):401.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
　Liang Tiande,Huang Quanming,Department of,et al.The Design and Development of a Single-Chip Micro Computer-Operated Tachometer[J].Journal of Huaqiao University(Natural Science),1992,13(1):401.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
[4]张奕鑫.活塞环槽定位销自动装配技术研究　(I)控制系统硬件[J].华侨大学学报(自然科学版),1995,16(2):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (I) Hardware of Control system[J].Journal of Huaqiao University(Natural Science),1995,16(1):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
[5]张奕鑫.活塞环槽定位销自动装配技术的研究　(Ⅱ)控制系统软件[J].华侨大学学报(自然科学版),1995,16(3):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (Ⅱ)Software of Control System[J].Journal of Huaqiao University(Natural Science),1995,16(1):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
[6]尤芳怡,张奕鑫.自动丝网印花机控制系统硬件的研究[J].华侨大学学报(自然科学版),1997,18(2):177.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
　You Fangyi,Zhang Yixin.A Study on the Hardware of an Automatic Control System for a Silk Net Calico Press and Its Design[J].Journal of Huaqiao University(Natural Science),1997,18(1):177.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
[7]尤芳怡,朱德友.水泥道板砖骨料定量加料控制系统硬件设计[J].华侨大学学报(自然科学版),2004,25(2):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]
　You Fangyi,Zhu Deyou.Hardware Design of a System for Controlling Quantitatively Feeding Raw Materials in Preparing Aggergate of Cement Brick Paving[J].Journal of Huaqiao University(Natural Science),2004,25(1):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]

更新日期/Last Update: 2014-03-22