相似文献/References:
[1]周再发.微电脑控制罐头杀菌锅[J].华侨大学学报(自然科学版),1985,6(3):343.[doi:10.11830/ISSN.1000-5013.1985.03.0343]
Zhou Zaifa.ATin Sterilizing Pot Controlled by Micro Computer[J].Journal of Huaqiao University(Natural Science),1985,6(3):343.[doi:10.11830/ISSN.1000-5013.1985.03.0343]
[2]周再发.微处理器控制SCR交流调压的研究[J].华侨大学学报(自然科学版),1986,7(3):343.[doi:10.11830/ISSN.1000-5013.1986.03.0343]
Zhou Zaifa.Using Microprocessor to Control SCR for the Adjustment of Alternating Voltage[J].Journal of Huaqiao University(Natural Science),1986,7(3):343.[doi:10.11830/ISSN.1000-5013.1986.03.0343]
[3]任秀珍.利用条件切换调节方式提高控制系统的调节品质[J].华侨大学学报(自然科学版),1987,8(3):364.[doi:10.11830/ISSN.1000-5013.1987.03.0364]
Ren Xiuzhen.Using Conditional Switching to Improve Regulating Quality of Control System[J].Journal of Huaqiao University(Natural Science),1987,8(3):364.[doi:10.11830/ISSN.1000-5013.1987.03.0364]
[4]王永初.双顺向解耦模式的计算方法[J].华侨大学学报(自然科学版),1988,9(1):68.[doi:10.11830/ISSN.1000-5013.1988.01.0068]
Wang Yongchu.Calculation of the Dual Forward Decoupling Mode[J].Journal of Huaqiao University(Natural Science),1988,9(3):68.[doi:10.11830/ISSN.1000-5013.1988.01.0068]
[5]王永初.现代控制理论与工程控制的衔接技术[J].华侨大学学报(自然科学版),1988,9(2):213.[doi:10.11830/ISSN.1000-5013.1988.02.0213]
Wang Yongchu.Linking up Modern Control Theery with Process Control[J].Journal of Huaqiao University(Natural Science),1988,9(3):213.[doi:10.11830/ISSN.1000-5013.1988.02.0213]
[6]张秋凝.单片机开发装置[J].华侨大学学报(自然科学版),1989,10(1):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
Zhang Qiuning.Single Chip Computer Developing Set[J].Journal of Huaqiao University(Natural Science),1989,10(3):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
[7]陈宝珊,陈希达.气门误差的单板机自动检测及分选控制原理(Ⅰ)[J].华侨大学学报(自然科学版),1989,10(2):186.[doi:10.11830/ISSN.1000-5013.1989.02.0186]
Chen Baoshan,Chen Xida.Principles of Automatic Testing and Selection Control of Valve Error(Ⅰ)[J].Journal of Huaqiao University(Natural Science),1989,10(3):186.[doi:10.11830/ISSN.1000-5013.1989.02.0186]
[8]周再发.“小教授”单板机调温系统的研究[J].华侨大学学报(自然科学版),1989,10(2):222.[doi:10.11830/ISSN.1000-5013.1989.02.0222]
Zhou Zaifa.Study on a“Micro-Professor”Temperature Controlled System[J].Journal of Huaqiao University(Natural Science),1989,10(3):222.[doi:10.11830/ISSN.1000-5013.1989.02.0222]
[9]魏献裕.C6140车床微机控制系统[J].华侨大学学报(自然科学版),1989,10(3):266.[doi:10.11830/ISSN.1000-5013.1989.03.0266]
Wel Xianyu.C-6140 Lathe Microcomputer Control System[J].Journal of Huaqiao University(Natural Science),1989,10(3):266.[doi:10.11830/ISSN.1000-5013.1989.03.0266]
[10]郑耀林.车床加工工件线速度的单片机检测显示装置[J].华侨大学学报(自然科学版),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
Zheng Yaolin.A Single Chip MicrocomPuter-Operated Device for Detecting and Displaying Linear Velocity of Workpiece on a Lathe[J].Journal of Huaqiao University(Natural Science),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
[11]张奕鑫.活塞环槽定位销自动装配技术研究 (I)控制系统硬件[J].华侨大学学报(自然科学版),1995,16(2):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (I) Hardware of Control system[J].Journal of Huaqiao University(Natural Science),1995,16(3):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]