[1]张宗欣.板材锯石机PC控制过程设计[J].华侨大学学报(自然科学版),1995,16(1):94-99.[doi:10.11830/ISSN.1000-5013.1995.01.0094]
　Zhang Zongxin.Process Design Controlled by Programmable Controller for the Use of Stone Plate Cutter[J].Journal of Huaqiao University(Natural Science),1995,16(1):94-99.[doi:10.11830/ISSN.1000-5013.1995.01.0094]
点击复制

板材锯石机PC控制过程设计()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第16卷
期数:
1995年第1期
页码:
94-99
栏目:
出版日期:
1995-01-20

文章信息/Info

Title:
Process Design Controlled by Programmable Controller for the Use of Stone Plate Cutter
作者:
张宗欣
华侨大学电子工程系
Author(s):
Zhang Zongxin
关键词:
锯石机床;  可编程控制器;  过程控制;  石板材
Keywords:
cut-off machines;  programmable controller;  process control;  stone plate cutter
分类号:
TU521.2
DOI:
10.11830/ISSN.1000-5013.1995.01.0094
摘要:
介绍板材锯石机可编程控制器控制过程设计,给出系统的硬件和软件图,对设计新型设备和改造旧设备都有现实意义.
Abstract:
A process design controlled by programmable controller is presented for the use of stone plate cutter; and the hardware and the software flowcharts of the system are given. The design is of practical significance for designing new stone plate cutter and i

相似文献/References:

[1]张家冰,苏溪泉,张宗欣.用PLC实现对板材锯石机的控制[J].华侨大学学报(自然科学版),1999,20(3):295.[doi:10.11830/ISSN.1000-5013.1999.03.0295]
　Zhang Jiabing,Su Xiquan,Zhang Zongxin.Realizing the Control of Stone Plate Cutter by a Programmable Logical Controller[J].Journal of Huaqiao University(Natural Science),1999,20(1):295.[doi:10.11830/ISSN.1000-5013.1999.03.0295]
[2]张家冰,苏溪泉,张宗欣.辊道窑磁砖生产线PLC控制[J].华侨大学学报(自然科学版),1999,20(4):419.[doi:10.11830/ISSN.1000-5013.1999.04.0419]
　Zhang Jiabing,Su Xiquan,Zhang Zongxin.Control of Programmable Controller (PLC) on the Tile Production Line of Roll Way Kiln[J].Journal of Huaqiao University(Natural Science),1999,20(1):419.[doi:10.11830/ISSN.1000-5013.1999.04.0419]
[3]周平.直缝焊管自动超声探伤系统设计[J].华侨大学学报(自然科学版),2016,37(2):145.[doi:10.11830/ISSN.1000-5013.2016.02.0145]
　ZHOU Ping.Design of Automatic Ultrasonic Inspection System of Longitudinal Welded Pipe[J].Journal of Huaqiao University(Natural Science),2016,37(1):145.[doi:10.11830/ISSN.1000-5013.2016.02.0145]
[4]李双,李钟慎.全自动簧片铆接生产线的设计[J].华侨大学学报(自然科学版),2017,38(2):153.[doi:10.11830/ISSN.1000-5013.201702004]
　LI Shuang,LI Zhongshen.Design of Automatic Production Line for Reed Riveting[J].Journal of Huaqiao University(Natural Science),2017,38(1):153.[doi:10.11830/ISSN.1000-5013.201702004]

更新日期/Last Update: 2014-03-22