[1]王晓霞.若干系统仿真软件的比较[J].华侨大学学报(自然科学版),1993,14(1):124-132.[doi:10.11830/ISSN.1000-5013.1993.01.0124]
　Wang Xiaoxia.A Comparison between Several Softwares of System Simulation[J].Journal of Huaqiao University(Natural Science),1993,14(1):124-132.[doi:10.11830/ISSN.1000-5013.1993.01.0124]
点击复制

若干系统仿真软件的比较()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第14卷
期数:
1993年第1期
页码:
124-132
栏目:
出版日期:
1993-01-20

文章信息/Info

Title:
A Comparison between Several Softwares of System Simulation
作者:
王晓霞
华侨大学计算机科学(电脑)系
Author(s):
Wang Xiaoxia
关键词:
系统仿真;  软件;  系统设计
Keywords:
system simulation;  softwares;  system design
DOI:
10.11830/ISSN.1000-5013.1993.01.0124
摘要:
本文对IBM ACSP(Automatic Control System Prograrm)、ALCON(Automatic LinearControl Software)、CSP(Control System Programs)以及MAILAB等自动化系统■件进行分析与比较,并指出这些软件在自动化系统设计的应用,评述系统仿真软件的完善与发展途径。
Abstract:
In this paper, the author makes analysis and comparison of seceral softwares of system simulation including ACSP (automatic control system program), ALCON (automatic linear control software), CSP (control system programs) and MATLAB; and points out their

相似文献/References:

[1]魏献裕.C6140车床微机控制系统[J].华侨大学学报(自然科学版),1989,10(3):266.[doi:10.11830/ISSN.1000-5013.1989.03.0266]
　Wel Xianyu.C-6140 Lathe Microcomputer Control System[J].Journal of Huaqiao University(Natural Science),1989,10(1):266.[doi:10.11830/ISSN.1000-5013.1989.03.0266]
[2]郭南国.工程CAD软件述评[J].华侨大学学报(自然科学版),1994,15(4):434.[doi:10.11830/ISSN.1000-5013.1994.04.0434]
　Guo Nanguo.A Review of Engineering CAD Software Systems[J].Journal of Huaqiao University(Natural Science),1994,15(1):434.[doi:10.11830/ISSN.1000-5013.1994.04.0434]
[3]张奕鑫.活塞环槽定位销自动装配技术的研究　(Ⅱ)控制系统软件[J].华侨大学学报(自然科学版),1995,16(3):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (Ⅱ)Software of Control System[J].Journal of Huaqiao University(Natural Science),1995,16(1):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
[4]蔡伯阳,谢明红,林碧,等.石材柱座柱帽机的双PC机数控系统[J].华侨大学学报(自然科学版),2001,22(3):288.[doi:10.3969/j.issn.1000-5013.2001.03.015]
　Cai Boyang,Xie Minghong,Lin Bi,et al.A Dual PC Based-NC System for Machine Tool to Cut Base and Crown of Stone Column[J].Journal of Huaqiao University(Natural Science),2001,22(1):288.[doi:10.3969/j.issn.1000-5013.2001.03.015]

更新日期/Last Update: 2014-03-22