[1]房怀英,李远,徐西鹏.圆锯片轴向变形的解析模型及其实验验证[J].华侨大学学报(自然科学版),2012,33(4):361-365.[doi:10.11830/ISSN.1000-5013.2012.04.0361]
　FANG Huai-ying,LI Yuan,XU Xi-peng.Analytical Model and Experimental Verification on Axial Deformation of Circular Saw in Sawing of Stone[J].Journal of Huaqiao University(Natural Science),2012,33(4):361-365.[doi:10.11830/ISSN.1000-5013.2012.04.0361]
点击复制

圆锯片轴向变形的解析模型及其实验验证()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第33卷
期数:
2012年第4期
页码:
361-365
栏目:
出版日期:
2012-07-20

文章信息/Info

Title:
Analytical Model and Experimental Verification on Axial Deformation of Circular Saw in Sawing of Stone
文章编号:
1000-5013(2012)04-0361-05
作者:
房怀英;  李远;  徐西鹏
华侨大学 脆性材料加工技术教育部工程研究中心, 福建 厦门 361021
Author(s):
FANG Huai-ying;  LI Yuan;  XU Xi-peng
MOE Engineering Research Center for Brittle Materials Machining, Huaqiao University, Xiamen 361021, China
关键词:
圆锯片;  轴向变形;  轴向力;  弹性薄板;  小挠度弯曲
Keywords:
circular saw;  axial deformation;  axial force;  elastic thin plate;  minor deflection bending
分类号:
TG717
DOI:
10.11830/ISSN.1000-5013.2012.04.0361
文献标志码:
A
摘要:
为研究石材锯切过程中圆锯片的轴向变形及其与轴向力之间的关系,根据弹性薄板小挠度弯曲的基本理论,对轴向力作用下圆锯片的轴向变形进行理论推导,并通过编程进行数值求解.采用实验方法测量圆锯片在锯切石材时的轴向变形及轴向力信号,并将圆锯片上一整圈的轴向变形实验结果与解析模型计算结果进行比较.研究表明:两种方法所得圆锯片轴向变形的结果符合得较好,由圆锯片所受的轴向力可以推导出锯片的轴向变形.
Abstract:
In order to study axial deformation of the circular saw in the stone sawing process and the relationship between axial deformation and axial force, in this paper, theoretical derivation was done firstly on axial deformation of the circular saw under axial force according to the bending theory of small deformation for thin elastic plate. And the numerical solution was done by programming. Then, the signals of axial deformation and axial force were measured by the stone sawing experiments. The experimental results were compared with the analytical solutions about axial deformation of a whole circle on the circular saw. Studies show that the results by two methods agree well with each other. And the axial deformation of the circular saw can be derived from the axial force acting on it.

参考文献/References:

[1] 徐西鹏.岩石材料的金刚石锯切研究进展[J].机械工程学报,2003,39(3):17-21.
[2] 谈耀麟.薄型金刚石圆锯片结构设计探讨[J].超硬材料工程,2007,19(1):34-36.
[3] FANG Huai-ying,LI Yuan,HUANG Hui,et al.Effects of cutting parameters on the transverse vibration of diamond circular saw blade[J].Advanced Materials Research,2010,126/127/128:667-671.
[4] 李庆华.高速回转圆盘薄片刀具横向振动的控制研究[D].长春:吉林大学,2007:26-27.
[5] 徐东镇.锯切时夹盘圆锯片横向振动特性研究[D].南京:南京林业大学,2006:21-26.
[6] 解振华.硅晶片内圆锯切过程的振动研究[D].广州:广东工业大学,2005.
[7] TIAN J F,HUTTON S G.Cutting-induced vibration in circular saws[J].Journal of Sound and Vibration,2001,242(5):907-922.
[8] 寿楠椿.弹性薄板弯曲[M].北京:高等教育出版社,1987.
[9] 刘鸿文.板壳理论[M].杭州:浙江大学出版社,1987:139-140.
[10] 房怀英,李远,徐西鹏.轴向力对圆锯片轴向变形的影响研究[J].中国机械工程,2011,22(8):966-970.

相似文献/References:

[1]王全凤,施士升.50米以上高层建筑在地震荷载下剪力墙数量的确定[J].华侨大学学报(自然科学版),1982,3(1 ):96.[doi:10.11830/ISSN.1000-5013.1982.01.0096]
[2]王全凤.框架结点转动的差分解[J].华侨大学学报(自然科学版),1987,8(2):171.[doi:10.11830/ISSN.1000-5013.1987.02.0171]
　Wang Quanfeng.Calculating the Rotation of certain Joints of Frame by Difference Method[J].Journal of Huaqiao University(Natural Science),1987,8(4):171.[doi:10.11830/ISSN.1000-5013.1987.02.0171]
[3]刘祖文.柱轴向变形对高层框架结构柔度矩阵影响分析[J].华侨大学学报(自然科学版),2000,21(4):380.[doi:10.3969/j.issn.1000-5013.2000.04.011]
　Liu Zuwen.Analysing the Effect of Axial Deformation of Column on Flexibility Matrix of a High-Rise Framed Structure[J].Journal of Huaqiao University(Natural Science),2000,21(4):380.[doi:10.3969/j.issn.1000-5013.2000.04.011]

备注/Memo

备注/Memo:
收稿日期: 2012-03-12
通信作者: 房怀英(1978-),女,副教授,主要从事脆性材料加工的研究.E-mail:happen@hqu.edu.cn.
基金项目: 福建省自然科学基金资助项目(2010J01294); 中央高校基本科研业务费专项资金资助,华侨大学“侨办”科研基金项目(JB-ZR1156)
更新日期/Last Update: 2012-07-20