[1]江开勇.熔融挤压堆积成形中材料丝的熔融过程分析[J].华侨大学学报(自然科学版),2000,21(3):302-306.[doi:10.3969/j.issn.1000-5013.2000.03.018]
　Jiang Kaiyong.Analysing Melting Process of Material Filaments during Forming by Melting Extrusion Modeling[J].Journal of Huaqiao University(Natural Science),2000,21(3):302-306.[doi:10.3969/j.issn.1000-5013.2000.03.018]
点击复制

熔融挤压堆积成形中材料丝的熔融过程分析()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第21卷
期数:
2000年第3期
页码:
302-306
栏目:
出版日期:
2000-07-20

文章信息/Info

Title:
Analysing Melting Process of Material Filaments during Forming by Melting Extrusion Modeling
文章编号:
1000-5013(2000)03-0302-05
作者:
江开勇
华侨大学机电工程系, 泉州362011
Author(s):
Jiang Kaiyong
Dept. of Electromech. Eng., Huaqiao Univ., 362011, Quanzhou
关键词:
快速成形;  熔融挤压堆积;  熔融模型;  加热温度
Keywords:
model of melting;  temperature of heating
分类号:
TK124
DOI:
10.3969/j.issn.1000-5013.2000.03.018
摘要:
应用传热学理论,建立材料丝在液化管中的熔融模型 .采用数值解方法,求出该模型的解 .研究结果对于合理选择液化管加热温度,具有重要的指导意义,同时为进一步研究送丝速度与加热温度的匹配问题,奠定良好的理论基础 .
Abstract:
By applying theory of heat transfer,a melting model of material filament in liquefied pipeline is built and solved by numerical method. The results are of important significance for reasonable choice of heating temperature of liquefied pipeline and they have laid a good theoretical basis for further studying the matching of feed speed of filament and heating temperature.

参考文献/References:

[1] 霍尔曼 J P, 马庆芳. 传热学 [M]. 北京:人民教育出版社, 1985.33-42.
[2] 俞昌铭. 热传导极其数值解 [M]. 北京:清华大学出版社, 1981.77-96.
[3] 肖棋, 江开勇. 熔融沉积快速成形工艺控制研究 [J]. 华侨大学学报(自然科学版), 1999(1):76-79.

相似文献/References:

[1]江开勇,刘道远.快速成形制造实体分层软件设计[J].华侨大学学报(自然科学版),1998,19(1):65.[doi:10.11830/ISSN.1000-5013.1998.01.0065]
　Jiang Kaiyong,Liu Daoyuan.Software design of Entity Layering in Rapid Prototype Modeling[J].Journal of Huaqiao University(Natural Science),1998,19(3):65.[doi:10.11830/ISSN.1000-5013.1998.01.0065]
[2]肖棋,江开勇.熔融沉积快速成形工艺控制研究[J].华侨大学学报(自然科学版),1999,20(1):76.[doi:10.11830/ISSN.1000-5013.1999.01.0076]
　Xiao Qi,Jiang Kaiyong.Process Control of Rapid Modeling by Fused Deposition[J].Journal of Huaqiao University(Natural Science),1999,20(3):76.[doi:10.11830/ISSN.1000-5013.1999.01.0076]
[3]唐明胜,曾颖,顾永华,等.LOM中激光功率与扫描速度的匹配模型[J].华侨大学学报(自然科学版),2001,22(3):292.[doi:10.3969/j.issn.1000-5013.2001.03.016]
　Tang Mingsheng,Zeng Ying,Gu Yonghua,et al.Matching Model of Laser Power and Scan Speed in Laminated Object Manufacturing[J].Journal of Huaqiao University(Natural Science),2001,22(3):292.[doi:10.3969/j.issn.1000-5013.2001.03.016]
[4]江开勇,刘斌,李洪友.快速成形技术的研究现状及发展趋势[J].华侨大学学报(自然科学版),2006,27(1):1.[doi:10.3969/j.issn.1000-5013.2006.01.001]
　Jiang Kaiyong,Liu Bin,Li Hongyou.Status Quo and Trend of the Study on Fast Forming Technique[J].Journal of Huaqiao University(Natural Science),2006,27(3):1.[doi:10.3969/j.issn.1000-5013.2006.01.001]

备注/Memo

备注/Memo:
福建省自然科学基金资助项目
更新日期/Last Update: 2014-03-23