[1]吴惠贞,吴洛平,陈子文.模具钢的渗硼工艺和组织与多冲压缩性能[J].华侨大学学报(自然科学版),1992,13(3):380-386.[doi:10.11830/ISSN.1000-5013.1992.03.0380]
　Wu Huizhen,Wu Luoping,Chen Ziwen,et al.Boron-Doping Technology and Micro-Structure of Die Steel and Its Resistance to Repeated Shock Compression[J].Journal of Huaqiao University(Natural Science),1992,13(3):380-386.[doi:10.11830/ISSN.1000-5013.1992.03.0380]
点击复制

模具钢的渗硼工艺和组织与多冲压缩性能()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第13卷
期数:
1992年第3期
页码:
380-386
栏目:
出版日期:
1992-07-20

文章信息/Info

Title:
Boron-Doping Technology and Micro-Structure of Die Steel and Its Resistance to Repeated Shock Compression
作者:
吴惠贞; 吴洛平; 陈子文
华侨大学精密机械工程系; 华侨大学精密机械工程系
Author(s):
Wu Huizhen;  Wu Luoping;  Chen Ziwen;  Department of;  Precision Mechanical;  Engineering
关键词:
渗硼工艺;  显微组织;  冲击压缩
Keywords:
boron-doping technology;  micro-struture;  shock compression
DOI:
10.11830/ISSN.1000-5013.1992.03.0380
摘要:
本文从多冲压缩抗力角度讨论了模具钢渗硼工艺和金相组织。结果指出:模具钢渗硼层在多次冲击压缩载荷下发生一定的塑性变形。渗硼组织中单相硼化物Fe2B具有较好的塑性和较高的多冲抗力,提出获得渗硼层中单相硼化物Fe2B的热处理工艺。
Abstract:
The boron-doping technology and metallurgical micro-structure of die steel are discussed from the angle of its resistance to repeated shock compression. The results are summarized as follow: A certain plastic deformation occurs in boron-doped layer of die

相似文献/References:

[1]陈子文.金属切削中切屑的显微组织变化[J].华侨大学学报(自然科学版),1985,6(2):196.[doi:10.11830/ISSN.1000-5013.1985.02.0196]
　Chen Ziwen.Structural Changes in Chip During Metal Cutting[J].Journal of Huaqiao University(Natural Science),1985,6(3):196.[doi:10.11830/ISSN.1000-5013.1985.02.0196]
[2]陈子文,E.M.Trent,M.L.H.Wise.碳化物形态对40CrMo钢切削性的影响[J].华侨大学学报(自然科学版),1986,7(3):291.[doi:10.11830/ISSN.1000-5013.1986.03.0291]
　Z .,W .,Chen E,et al.The Influence of Carbide Morphology on the Machinability of 40CrMo Steel (SAE4140)[J].Journal of Huaqiao University(Natural Science),1986,7(3):291.[doi:10.11830/ISSN.1000-5013.1986.03.0291]
[3]李曼安,许承晃.电极过程的动态显微观察及电化学参数的同步测定 电解槽的设计和应用[J].华侨大学学报(自然科学版),1987,8(2):159.[doi:10.11830/ISSN.1000-5013.1987.02.0159]
　Li Manan,Xu Chenghuang.Kinetic Microscopic Observation on Electrode Process and Synchronous Determination of Electrochemical Parameters[J].Journal of Huaqiao University(Natural Science),1987,8(3):159.[doi:10.11830/ISSN.1000-5013.1987.02.0159]
[4]陈子文.刀具温度分布与组织结构的关系[J].华侨大学学报(自然科学版),1991,12(1):16.[doi:10.11830/ISSN.1000-5013.1991.01.0016]
　Chen Ziwen,Department of,Precision Mechanical,et al.The Relation between Temperature Distribution of Cutting Tool and Its Microstructure[J].Journal of Huaqiao University(Natural Science),1991,12(3):16.[doi:10.11830/ISSN.1000-5013.1991.01.0016]
[5]陈子文,杨卫东.积屑瘤的稳定性与显微裂纹[J].华侨大学学报(自然科学版),1991,12(2):190.[doi:10.11830/ISSN.1000-5013.1991.02.0190]
　Chen Ziwen,Yang Weidong.The Stability of Built-up Edge(BUE)and Its Microcracks[J].Journal of Huaqiao University(Natural Science),1991,12(3):190.[doi:10.11830/ISSN.1000-5013.1991.02.0190]
[6]吴惠贞,陈子文.钢的切屑变形和断裂[J].华侨大学学报(自然科学版),1993,14(4):477.[doi:10.11830/ISSN.1000-5013.1993.04.0477]
　Wu Huizhen,Chen Ziwen,Department of,et al.Deformation and fracture of Chip in steel[J].Journal of Huaqiao University(Natural Science),1993,14(3):477.[doi:10.11830/ISSN.1000-5013.1993.04.0477]
[7]吴洛平.Hpb59-1黄铜超塑性压缩变形后金相组织的变化[J].华侨大学学报(自然科学版),1993,14(4):483.[doi:10.11830/ISSN.1000-5013.1993.04.0483]
　Wu Luoping,department of,Precision Mechanical,et al.Change of HPb59-1 Brass in Its Metallurgical Microstructure after superplastic Compressive Strain[J].Journal of Huaqiao University(Natural Science),1993,14(3):483.[doi:10.11830/ISSN.1000-5013.1993.04.0483]

更新日期/Last Update: 2014-03-22