[1]张秋凝.单片机开发装置[J].华侨大学学报(自然科学版),1989,10(1):94-98.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
　Zhang Qiuning.Single Chip Computer Developing Set[J].Journal of Huaqiao University(Natural Science),1989,10(1):94-98.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
点击复制

单片机开发装置()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第10卷
期数:
1989年第1期
页码:
94-98
栏目:
出版日期:
1989-01-20

文章信息/Info

Title:
Single Chip Computer Developing Set
作者:
张秋凝
华侨大学电子工程系
Author(s):
Zhang Qiuning
关键词:
单片机;  开发装置;  单板机;  用户程序;  存贮器;  单字节指令;  计数器;  计算机;  引脚信号;  监控程序
DOI:
10.11830/ISSN.1000-5013.1989.01.0094
摘要:
本文介绍如何利用现有“小教授”单板机开发单片机的应用软件.
Abstract:
A single chip computer,which collecting all the functional units in a single chip of silicon,is useful in automatic control and intelligent instruments. This paper develops,by means of“Microprofessor”single board computer, the application software for a s

相似文献/References:

[1]郑耀林.车床加工工件线速度的单片机检测显示装置[J].华侨大学学报(自然科学版),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
　Zheng Yaolin.A Single Chip MicrocomPuter-Operated Device for Detecting and Displaying Linear Velocity of Workpiece on a Lathe[J].Journal of Huaqiao University(Natural Science),1991,12(1):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
[2]梁天德,黄传明.单片机测速仪的设计和研制[J].华侨大学学报(自然科学版),1992,13(3):401.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
　Liang Tiande,Huang Quanming,Department of,et al.The Design and Development of a Single-Chip Micro Computer-Operated Tachometer[J].Journal of Huaqiao University(Natural Science),1992,13(1):401.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
[3]张奕鑫.活塞环槽定位销自动装配技术研究　(I)控制系统硬件[J].华侨大学学报(自然科学版),1995,16(2):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (I) Hardware of Control system[J].Journal of Huaqiao University(Natural Science),1995,16(1):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
[4]张奕鑫.活塞环槽定位销自动装配技术的研究　(Ⅱ)控制系统软件[J].华侨大学学报(自然科学版),1995,16(3):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (Ⅱ)Software of Control System[J].Journal of Huaqiao University(Natural Science),1995,16(1):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
[5]尤芳怡,张奕鑫.自动丝网印花机控制系统硬件的研究[J].华侨大学学报(自然科学版),1997,18(2):177.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
　You Fangyi,Zhang Yixin.A Study on the Hardware of an Automatic Control System for a Silk Net Calico Press and Its Design[J].Journal of Huaqiao University(Natural Science),1997,18(1):177.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
[6]刘建春,张奕鑫.X8120数控改造的硬件设计[J].华侨大学学报(自然科学版),1998,19(1):61.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
　Liu Jianchun,Zhang Yixin.Hardware Design for Reconstructing Milling Machine X8120 into One of Numerical Control[J].Journal of Huaqiao University(Natural Science),1998,19(1):61.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
[7]尤芳怡,朱德友.水泥道板砖骨料定量加料控制系统硬件设计[J].华侨大学学报(自然科学版),2004,25(2):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]
　You Fangyi,Zhu Deyou.Hardware Design of a System for Controlling Quantitatively Feeding Raw Materials in Preparing Aggergate of Cement Brick Paving[J].Journal of Huaqiao University(Natural Science),2004,25(1):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]

更新日期/Last Update: 2014-03-22