[1]陈启勇,王荣坤,满飞.采用模型设计的不间断电源整机 控制系统开发与设计[J].华侨大学学报(自然科学版),2019,40(5):593-599.[doi:10.11830/ISSN.1000-5013.201812001]
　CHEN Qiyong,WANG Rongkun,MAN Fei.Development of Uninterruptible Power SupplyControl System Using Model Design[J].Journal of Huaqiao University(Natural Science),2019,40(5):593-599.[doi:10.11830/ISSN.1000-5013.201812001]
点击复制

采用模型设计的不间断电源整机 控制系统开发与设计()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第40卷
期数:
2019年第5期
页码:
593-599
栏目:
出版日期:
2019-09-20

文章信息/Info

Title:
Development of Uninterruptible Power SupplyControl System Using Model Design
文章编号:
1000-5013(2019)05-0593-07
作者:
陈启勇;  王荣坤;  满飞
华侨大学 信息科学与工程学院, 福建 厦门 361021
Author(s):
CHEN Qiyong;  WANG Rongkun;  MAN Fei
College of Information Science and Engineering, Huaqiao University, Xiamen 361021, China
关键词:
不间断电源;  基于模型的设计;  分层设计;  代码自动生成;  软件在环测试
Keywords:
uninterruptible power supply;  model based design;  hierarchical design;  code automatic generation;  software in loop test
分类号:
TM727
DOI:
10.11830/ISSN.1000-5013.201812001
文献标志码:
A
摘要:
针对传统不间断电源(UPS)整机控制策略存在切换条件覆盖面不足、难以追溯问题根源,以及传统的开发方法开发周期长、效率低等问题,采用分层设计方法设计不间断电源控制系统结构.首先,将整机控制策略的制定化分为各层次子功能模块策略的制定.然后,采用基于模型设计的开发方法,在MATLAB/Simulink仿真工具上完成从模型搭建、代码自动生成到软件在环测试的开发过程.最后,将自动生成的代码下载到实验样机上进行集成整机测试.实验结果表明:基于模型设计方法开发的整机控制器可以准确实现UPS切换供电功能;采用分层设计的方法简化控制系统的设计,有助于软件的移植、升级和查找问题;基于模型设计自动生成的代码完全可以替代人工的编码,缩短开发周期.
Abstract:
Aiming at the disadvantages of the traditional uninterruptible power supply(UPS)control strategy, such as insufficient coverage for switching conditions, difficulty in tracing the root causes of problems, long development cycle and low efficiency, a hierarchical design method was adopted to design the structure of the UPS control system. Firstly, the formulation of the whole control strategy was divided into formulations of sub-function module strategies for each level. Then the development method based on model design was used to complete the development process from model building, code auto-generation to software in loop test using MATLAB/Simulink simulation. Finally, the auto-generated code was downloaded to the experimental prototype to conduct the integrated whole system test. Simulation and experimental results show that the machine controller based on the model design method can realize the function of accurate switching the power supply of the UPS. The layered structure design simplifies the design of the control system and facilitates software migration, upgrading, and problem locating. The automatically generated code based on the model design can completely replace the manual coding, which can shorten the development cycle.

参考文献/References:

[1] ZOU Zhixiang,WANG Zheng,CHENG Ming.Design and analysis of operating strategies for a generalised voltage-source power supply based on internal model principle[J].Iet Power Electronics,2014,7(2):330-339.DOI:10.1049/iet-pel.2013.0159.
[2] KAYABASI A,AKKAYA R.The design and implementation of a microcontroller-based single phase on-line uninterrupted power supply with power factor correction[C]//International Conference on Electrical and Electronics Engineering.Bursa:IEEE Press,2009:442-446.DOI:10.1109/ELECO.2009.5355274.
[3] 宋慧延,刘强,牛大伟.一种挖掘机电控系统性能测试平台的设计[J].华侨大学学报(自然科学版),2014,35(3):250-252.DOI:10.11830/ISSN.1000-5013.2014.03.0250.
[4] 来鑫,姜淳,金昌,等.基于模型设计的4WIS-4WID车辆教学实验平台[J].实验室研究与探索,2018,37(6):56-59,67.DOI:10.3696/j.issn.1006.7167.2018.06.014.
[5] 佘超.基于模型设计的电动汽车永磁同步电机无速度传感器控制策略的研究[D].北京:北京交通大学,2018.
[6] HARNETT C K,TEMPLETON J,DUNPHY-GUZMAN K A,et al.Model based design of a microfluidic mixer driven by induced charge electroosmosis[J].Lab on a Chip,2008,8(4):565-572.DOI:10.1039/b717416k.
[7] 刘雪梅,郭改平.基于模型设计的飞机装配检测技术分析[J].中国工程机械学报,2017,15(6):547-551.DOI:10.15999/j.cnki.311926.2017.06.014.
[8] 田韶鹏,阙同亮.基于模型设计的电动车整车控制器开发研究[J].自动化与仪表,2017,32(9):60-64.DOI:10.19557/j.cnki.1001-9944.2017.09.015.
[9] 王博舒,新峰,王小银,等.自动代码生成技术的发展现状与趋势[J].西安邮电大学学报,2018,23(3):1-12.DOI:10.13682/j.issn.2095-6533.2018.03.001.
[10] 陈攀.电动汽车控制器自动代码生成及标定系统研究[D].济南:山东大学,2018.
[11] KRIZANJ,ERTL L,BRADAC M,et al.Automatic code generation from Matlab/Simulink for critical applications[C]//27th Canadian Conference on Electrical and Computer Engineering.Toronto:IEEE Press,2014:1-6.DOI:10.1109/CCECE.2014.6901058.
[12] 樊启永,顾立志,宋金玲.Pro/E和VERICUT虚拟机床建模与仿真[J].华侨大学学报(自然科学版),2010,31(2):126-131.DOI:10.11830/issn.1000-5013.2010.02.0216.
[13] 刘振华.SIL平台在功能测试方面的应用[C]//2014中国汽车工程学会年会.北京:机械工业出版社,2014:633-637.
[14] 宋大凤,李幼德,李静,等.汽车牵引力控制软件在环仿真研究[J].农业机械学报,2005(8):27-29.DOI:10.3969/j.issn.1000-1298.2005.08.008.
[15] VANDI G,CAVINA N,CORTI E,et al.Development of a software in the loop environment for automotive powertrain systems[J].Energy Procedia,2014,45:789-798.DOI:10.1016/j.egypro.2014.01.084.

备注/Memo

备注/Memo:
收稿日期: 2018-12-03
通信作者: 王荣坤(1986-),男,讲师,博士,主要从事电力、电子与电气传动的研究.E-mail:wangrongkun@hqu.edu.cn.
基金项目: 国家自然科学基金资助项目(51707068, 51477058); 华侨大学研究生科研创新基金资助项目(17014 082002)
更新日期/Last Update: 2019-09-20