[1]黄燕涛,郭新华,项雷军.内置式永磁电机齿槽转矩的优化设计[J].华侨大学学报(自然科学版),2016,37(5):536-540.[doi:10.11830/ISSN.1000-5013.201605003]
 HUANG Yantao,GUO Xinhua,XIANG Leijun.Optimal Design of Cogging Torque of Interior Permanent Magnet Motor[J].Journal of Huaqiao University(Natural Science),2016,37(5):536-540.[doi:10.11830/ISSN.1000-5013.201605003]
点击复制

内置式永磁电机齿槽转矩的优化设计()
分享到:

《华侨大学学报(自然科学版)》[ISSN:1000-5013/CN:35-1079/N]

卷:
第37卷
期数:
2016年第5期
页码:
536-540
栏目:
出版日期:
2016-09-20

文章信息/Info

Title:
Optimal Design of Cogging Torque of Interior Permanent Magnet Motor
文章编号:
1000-5013(2016)05-0536-05
作者:
黄燕涛1 郭新华12 项雷军1
1. 华侨大学 信息科学与工程学院, 福建 厦门 361021;2. 香港理工大学 电气工程学院, 中国 香港特别行政区
Author(s):
HUANG Yantao1 GUO Xinhua12 XIANG Leijun1
1. College of Information Science and Engineering, Huaqiao University, Xiamen 361021, China; 2. Department of Electrical Engineering, The Hong Kong Polytechnic University, Hong Kong SAR, China
关键词:
内置式永磁同步电机 齿槽转矩 转子分段斜极 非均匀气隙
Keywords:
interior permanent magnet synchronous motor cogging torque step skewing of rotor non-uniform air gap
分类号:
TM351
DOI:
10.11830/ISSN.1000-5013.201605003
文献标志码:
A
摘要:
针对内置式永磁同步电机存在的齿槽转矩问题,采用有限元软件Maxwell分别对不同分段数、不同非均匀气隙情况下的内置式永磁同步电机进行分析.理论分析表明:转子分段斜极可以抑制齿谐波,从而削弱齿槽转矩;而采用非均匀气隙结构则可以通过优化气隙磁密的特定次谐波削弱齿槽转矩.依据理论分析,提出一种二者相结合的方法抑制电机的齿槽转矩.优化结果表明:该方法能有效地抑制电机的齿槽转矩.
Abstract:
In order to solve the issues on cogging torque of interior permanent magnet synchronous motor(IPMSM), the IPMSMs with different segments and non-uniform air gap were analyzed using the finite element software Maxwell in this paper. Theoretical analysis showed that teeth harmonics can be effectively reduced by step skewing of rotor, which leads to the decrease of cogging torque; meanwhile, the cogging torque can also be minimized by introducing the non-uniform air gap based on specific harmonic of optimal gap flux density. On the basis of the theory analysis, a combined method is proposed to eliminate the cogging torque of IPMSM. Optimization results verify the described method can effectively reduce the cogging torque of the IPMSM.

参考文献/References:

[1] 夏永洪,黄劭刚.齿谐波绕组电流对电枢绕组空载电压波形的影响[J].中国电机工程学报,2014,34(6):910-916.
[2] 彭兵,夏加宽,董婷,等.不等齿宽提高多槽少极隔齿隔相绕组永磁电机转矩的方法[J].中国电机工程学报,2012,32(增刊1):242-248.
[3] FAZIL M,RAJAGOPAL K R.A novel air-gap profile of single-phase permanent-magnet brushless DC motor for starting torque improvement and cogging torque reduction[J].IEEE Transactions on Magnetics,2010,46(11):3928-3932.
[4] 罗宏浩,廖自力.永磁电机齿槽转矩的谐波分析与最小化设计[J].电机与控制学报,2010,14(4):36-40.
[5] 王晓远,贾旭.基于槽口优化的电动汽车用大功率无刷直流电机齿槽转矩削弱方法[J].电工技术学报,2013,28(6):40-45.
[6] 杨玉波,王秀和,朱常青.基于分块永磁磁极的永磁电机齿槽转矩削弱方法[J].电工技术学报,2012(3):73-78.
[7] LIU Ting,HUANG Shoudao,GAO Jian.A method for reducing cogging torque by magnet shifting in permanent magnet machines[C]//International Conference on Electrical Machines and Systems.Incheon:IEEE Press,2010:1073-1076.
[8] 王道涵,王秀和,丁婷婷,等.基于磁极不对称角度优化的内置式永磁无刷直流电动机齿槽转矩削弱方法[J].中国电机工程学报,2008,28(9):66-70.
[9] 杨玉波,王秀和,丁婷婷.基于单一磁极宽度变化的内置式永磁同步电动机齿槽转矩削弱方法[J].电工技术学报,2009,24(7):41-45.
[10] DUTTA R,SAYEEF S,RAHMAN M F.Analysis of cogging torque and its effect on direct torque control(DTC)in a segmented interior permanent magnet machine[C]//Power Electronics Specialists Conference.Orlando:IEEE Press,2007:2568-2574.
[11] KIM T W,CHANG J H.Effective step-skew method for cogging torque reduction in surface-mounted permanent magnet synchronous motor[J].Journal of the Korean Physical Society,2013,63(3):288-292.
[12] AXAR Z,ZHU Z Q,OMBACH G.Influence of electric loading and magnetic saturation on cogging torque, back-EMF and torque ripple of PM machines[J].IEEE Transactions on Magnetics,2012,48(10):2650-2658.
[13] 王秀和.永磁电机[M].北京:中国电力出版社,2010:71-115.
[14] WANG Xiuhe,YANG Yubo,FU Dajin.Study of cogging torque in surface-mounted permanent magnet motors with energy method[J].Journal of Magnetism and Magnetic Materials,2003,267(1):80-85.
[15] 汤蕴缪.电机学[M].北京:机械工业出版社,2011:143-147.

相似文献/References:

[1]胡启国,吴明钦.转子磁极分段移位斜极对永磁同步电机转矩的影响[J].华侨大学学报(自然科学版),2022,43(1):29.[doi:10.11830/ISSN.1000-5013.202012011]
 HU Qiguo,WU Mingqin.Effect of Segmented Shift of Rotor Magnetic Pole on Torque of Permanent Magnet Synchronous Motor[J].Journal of Huaqiao University(Natural Science),2022,43(5):29.[doi:10.11830/ISSN.1000-5013.202012011]

备注/Memo

备注/Memo:
收稿日期: 2015-07-28
通信作者: 郭新华(1977-),男,副教授,博士,主要从事永磁型双机械端口电机、永磁同步电机、多相电机的驱动控制,中压大功率永磁(异步)牵引系统控制的研究.E-mail:guoxinhua@hqu.edu.cn.
基金项目: 国家自然科学基金资助项目(51477058); 福建省自然科学基金资助项目(2013J01198); 华侨大学中青年教师科研提升计划项目(ZQN-YX304)
更新日期/Last Update: 2016-09-20