[1]黄智炜,郭震宁,林介本,等.大功率发光二极管路灯的一次光学仿真设计[J].华侨大学学报(自然科学版),2011,32(5):502-505.[doi:10.11830/ISSN.1000-5013.2011.05.0502]
 HUANG Zhi-wei,GUO Zhen-ning,LIN Jie-ben,et al.High-Power Light-Emitting Diode′s First Optical Design and Simulation for Road Light[J].Journal of Huaqiao University(Natural Science),2011,32(5):502-505.[doi:10.11830/ISSN.1000-5013.2011.05.0502]
点击复制

大功率发光二极管路灯的一次光学仿真设计()
分享到:

《华侨大学学报(自然科学版)》[ISSN:1000-5013/CN:35-1079/N]

卷:
第32卷
期数:
2011年第5期
页码:
502-505
栏目:
出版日期:
2011-09-20

文章信息/Info

Title:
High-Power Light-Emitting Diode′s First Optical Design and Simulation for Road Light
文章编号:
1000-5013(2011)05-0502-04
作者:
黄智炜郭震宁林介本董菁菁
华侨大学信息科学与工程学院
Author(s):
HUANG Zhi-wei GUO Zhen-ning LIN Jie-ben DONG Jing-jing
College of Information Science and Engineering, Huaqiao University, Quanzhou 362021, China
关键词:
光学设计 发光二极管 蝙蝠翼型 路灯 配光曲线
Keywords:
optical design light-emitting diode bat-wing pattern road light intensity distribution
分类号:
TM923.5
DOI:
10.11830/ISSN.1000-5013.2011.05.0502
文献标志码:
A
摘要:
利用反光碗对芯片出射光的角度限制,应用自由透镜曲面对光的聚光和散光作用,研究大功率发光二极管(LED)的配光曲线.设计反光碗和一次光学透镜,通过优化一次光学系统的参数,实现路灯用大功率LED配光曲线具有蝙蝠翼型,接受面上的光斑呈矩形分布的特征.仿真结果表明:设计可以达到路灯要求的光分布,可实现照度均匀度高达0.846,完全满足当前道路照明的照度要求.
Abstract:
Base on the CMOS chip′s emission angle limited by the reflector,and applying the effect of the light′s convergence and divergence by free-surface lens,the high-power light-emitting diode′s intensity distribution was studied.The paper designs a reflector by through optimizing the first optical system′s parameters to realizes light-emitting diode′s intensity distribution as bat-wing,and receiver′s irradiance distribution as rectangle.The simulation results show this design meets the requirement of the road light and the irradiance uniformity up to 0.846.

参考文献/References:

[1] SU Hong-dong, WANG Ya-jun, DONG Ji-yang. Computer modeling and simulation evaluation of high power LED sources for secondary optical design [J]. Semiconductor Photonics and Technology, 2007(3):186-191.
[2] SCHUBERT E F, KIM J K. Solid-state light sources getting smart [J]. Science, 2005, (5726):1274-1278.doi:10.1126/science.1108712.
[3] JONES E D. Light emitting diodes (LEDs) for general illumination [M]. Washington D C:Optoelectronics Industry Development Association, 2001.
[4] 徐瑞麟, 俞伟民, 屠其非. 高效率LED交通信号灯的二次光学设计 [J]. 中国照明电器, 2007(2):11-13.doi:10.3969/j.issn.1002-6150.2007.02.003.
[5] 陈波, 李伟平, 黄杨程. 一款LED后位灯的光学设计与仿真 [J]. 光学仪器, 2006(5):37-41.doi:10.3969/j.issn.1005-5630.2006.05.008.
[6] 高铁成, 艾艳锦, 杨广华. LED路灯的二次光学设计 [J]. 光机电信息, 2008, (10):41-44.doi:10.3969/j.issn.1007-1180.2008.10.009.
[7] 屈恩世, 张恒金, 曹剑中. 对光学设计中照度计算公式的讨论 [J]. 光学学报, 2008(7):1364-1368.doi:10.3321/j.issn:0253-2239.2008.07.028.
[8] 张鉴, 杨明武, 胡智文. LED环氧树脂封装的光学设计与模拟 [J]. 合肥工业大学学报(自然科学版), 2008, (10):1695-1698.doi:10.3969/j.issn.1003-5060.2008.10.040.
[9] TIAN Da-lei, GUAN Rong-feng, WANG Xing. Optimized design of LED daylight lamp lighting system [J]. Semiconductor Photonics and Technology, 2008(2):121-123.

相似文献/References:

[1]李建功,郭震宁,董菁菁,等.一种圆形导光板散射网点的设计与仿真[J].华侨大学学报(自然科学版),2012,33(5):495.[doi:10.11830/ISSN.1000-5013.2012.05.0495]
 LI Jian-gong,GUO Zhen-ning,DONG Jing-jing,et al.Design and Simulation of a Round Light Guide Plate Scattering Netted Dots[J].Journal of Huaqiao University(Natural Science),2012,33(5):495.[doi:10.11830/ISSN.1000-5013.2012.05.0495]
[2]张锦华,王加贤,朱大庆.荧光粉涂层对大功率PC-LED光提取效率的影响[J].华侨大学学报(自然科学版),2012,33(6):630.[doi:10.11830/ISSN.1000-5013.2012.06.0630]
 ZHANG Jin-hua,WANG Jia-xian,ZHU Da-qing.Effect of Phosphor Coating Layer on the Extraction Efficiency of the High-Power PC-LED[J].Journal of Huaqiao University(Natural Science),2012,33(5):630.[doi:10.11830/ISSN.1000-5013.2012.06.0630]
[3]郑天清,顾立志.LED散热体冲压成形尺寸和形状的误差数学模型建立[J].华侨大学学报(自然科学版),2015,36(4):371.[doi:10.11830/ISSN.1000-5013.2015.04.0371]
 ZHENG Tian-qing,GU Li-zhi.Establishment of the Mathematical Model of Stamping Size andShape Error for LED Heat Dissipation Body[J].Journal of Huaqiao University(Natural Science),2015,36(5):371.[doi:10.11830/ISSN.1000-5013.2015.04.0371]
[4]单孝忍,陈嘉鸿,丁攀峰.带半圆柱微透镜的超薄直下式LED平板灯设计[J].华侨大学学报(自然科学版),2020,41(5):647.[doi:10.11830/ISSN.1000-5013.201909019]
 SHAN Xiaoren,CHEN Jiahong,DING Panfeng.Design of Ultra-Thin Straight-Down LED Panel Lamp With Semi-Cylindrical Microlens[J].Journal of Huaqiao University(Natural Science),2020,41(5):647.[doi:10.11830/ISSN.1000-5013.201909019]
[5]董菁菁,郭震宁,林介本,等.发光二极管辐射模型的快速建立与验证[J].华侨大学学报(自然科学版),2012,33(2):143.[doi:10.11830/ISSN.1000-5013.2012.02.0143]
 DONG Jing-jing,GUO Zhen-ning,LIN Jie-ben,et al.Quickly Modeling of Light Emitting Diode Radiation Pattern and Certifying[J].Journal of Huaqiao University(Natural Science),2012,33(5):143.[doi:10.11830/ISSN.1000-5013.2012.02.0143]
[6]陈俄振,郭震宁,智佳军.LED扩展光源均匀照明的透镜设计[J].华侨大学学报(自然科学版),2013,34(6):632.[doi:10.11830/ISSN.1000-5013.2013.06.0632]
 CHEN E-zhen,GUO Zhen-ning,ZHI Jia-jun.Lens Design with Uniform Illumination of the LED Extended Sources[J].Journal of Huaqiao University(Natural Science),2013,34(5):632.[doi:10.11830/ISSN.1000-5013.2013.06.0632]

备注/Memo

备注/Memo:
福建省科技计划重点项目(2009H0034); 福建省自然科学基金资助项目(2010J01338); 福建省厦门市科技计划重点项目(3502Z20093033); 福建省泉州市科技计划重点项目(2008G7)
更新日期/Last Update: 2014-03-23