[1]陈建亚.H3PO4-CuO粘结剂在金刚石磨具制备中的应用[J].华侨大学学报(自然科学版),2004,25(3):326-327.[doi:10.3969/j.issn.1000-5013.2004.03.025]
　Chen Jianya.Application of H3PO4-CuO Adhesive to the Preparation of Diamond Grinder[J].Journal of Huaqiao University(Natural Science),2004,25(3):326-327.[doi:10.3969/j.issn.1000-5013.2004.03.025]
点击复制

H3PO4-CuO粘结剂在金刚石磨具制备中的应用()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第25卷
期数:
2004年第3期
页码:
326-327
栏目:
出版日期:
2004-07-20

文章信息/Info

Title:
Application of H3PO4-CuO Adhesive to the Preparation of Diamond Grinder
文章编号:
1000-5013(2004)03-0326-02
作者:
陈建亚
华侨大学材料科学与工程学院 福建泉州362021
Author(s):
Chen Jianya
College of Mater. Sci. & Eng., Huaqiao Univ., 362021, Quanzhou, China
关键词:
H3PO4-CuO;  树脂磨具;  粘结剂;  热压成型
Keywords:
H3PO 4-CuO;  resin grinder;  adhesive;  hot forming
分类号:
TG74
DOI:
10.3969/j.issn.1000-5013.2004.03.025
文献标志码:
A
摘要:
采用无机粘结剂H3 PO4 CuO取代酚醛树脂粘结剂,制作树脂磨具 .CuO粉在 890~ 910℃下灼烧,灼烘后经球磨机破碎,加入H3 PO4,Al(OH) 3 混合液,以及金刚石微粉、白刚玉、填料和其它添加剂等,搅拌均匀,于热压机上加热至 14 0℃,热压成型 .脱模后,磨块放置 1~ 2h,于 80℃烘干 3h .用环氧树脂胶接种在酚醛树脂磨盘上,制作成锋利、耐磨的树脂磨具 .
Abstract:
Inorganic adhesive H3PO4 CuO is presented for replacing phenol aldehyde resin adhesive in preparing diamond grinder. CuO powder is calcined into agglomeration at 890~910 ℃, and is crushed in ball mill and is screened through a screen with 200~300 meshes. Add into it the mixture solution of H 3PO 4 and Al(OH) 3, primary abrasive diamond powder, white corundum, W A, filler and some other additives. Agitate them homogeniously. Put them into the mould and heat them up to 140 ℃ at hot pressing machine. After hot forming and stripping, the grinding block is placed 1~2 hours. and is dried at 80 ℃ for 3 hours. And then, the grinding block is sticked to a phenolic resin grinding plate with epoxy resin glue. A resin grinder characterized by sharp and wear resistance is made.

参考文献/References:

[1] 李士学, 蔡永源, 周振丰. 胶粘剂制备及应用 [M]. 天津:天津科学技术出版社, 1984.105-106.
[2] 殷立新, 余修成. 胶粘基础与胶粘剂 [M]. 北京:航空工业出版社, 1988.89-90.
[3] 孟庆辉, 李印江. 磨料磨具技术手册 [M]. 北京:兵器工业出版社, 1993.559-560.

相似文献/References:

[1]杜慷慨,林志勇.酚醛树脂在异型石材磨具中的应用[J].华侨大学学报(自然科学版),1999,20(3):246.[doi:10.11830/ISSN.1000-5013.1999.03.0246]
　Du Kangkai,Lin Zhiyong.Appliication of Phenol Aldehyde Resin to Abrasive Tools for Grinding Special Shaped Stone[J].Journal of Huaqiao University(Natural Science),1999,20(3):246.[doi:10.11830/ISSN.1000-5013.1999.03.0246]

更新日期/Last Update: 2014-03-23