[1]尤芳怡,张奕鑫.自动丝网印花机控制系统硬件的研究[J].华侨大学学报(自然科学版),1997,18(2):177-180.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
　You Fangyi,Zhang Yixin.A Study on the Hardware of an Automatic Control System for a Silk Net Calico Press and Its Design[J].Journal of Huaqiao University(Natural Science),1997,18(2):177-180.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
点击复制

自动丝网印花机控制系统硬件的研究()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第18卷
期数:
1997年第2期
页码:
177-180
栏目:
出版日期:
1997-04-20

文章信息/Info

Title:
A Study on the Hardware of an Automatic Control System for a Silk Net Calico Press and Its Design
作者:
尤芳怡; 张奕鑫
华侨大学精密机械工程系, 泉州 362011
Author(s):
You Fangyi;  Zhang Yixin
关键词:
单片机;  丝网印花机;  硬件
Keywords:
single-chip rnicrocomputer;  silk net calico press;  hardware
分类号:
TQ174.76
DOI:
10.11830/ISSN.1000-5013.1997.02.0177
摘要:
为改善瓷砖生产线中饰面砖印花机的定位精度和印刷质量,研究以8032单片机为核心的自动丝网印花机控制系统,特别是采用硬件与软件相结合的方法,着重研究控制系统的硬件及外围接口.实验表明,该系统具有明显简化控制线路等优点.
Abstract:
With respect to a silk net calico-printing machine of tapestry brick in a tile production line, a studyis made on an automatic control system with 8032 single-chip microcomputer as its core. By adopting themethod of combining hardware with software, the s

相似文献/References:

[1]张秋凝.单片机开发装置[J].华侨大学学报(自然科学版),1989,10(1):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
　Zhang Qiuning.Single Chip Computer Developing Set[J].Journal of Huaqiao University(Natural Science),1989,10(2):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
[2]郑耀林.车床加工工件线速度的单片机检测显示装置[J].华侨大学学报(自然科学版),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
　Zheng Yaolin.A Single Chip MicrocomPuter-Operated Device for Detecting and Displaying Linear Velocity of Workpiece on a Lathe[J].Journal of Huaqiao University(Natural Science),1991,12(2):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
[3]梁天德,黄传明.单片机测速仪的设计和研制[J].华侨大学学报(自然科学版),1992,13(3):401.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
　Liang Tiande,Huang Quanming,Department of,et al.The Design and Development of a Single-Chip Micro Computer-Operated Tachometer[J].Journal of Huaqiao University(Natural Science),1992,13(2):401.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
[4]张奕鑫.活塞环槽定位销自动装配技术研究　(I)控制系统硬件[J].华侨大学学报(自然科学版),1995,16(2):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (I) Hardware of Control system[J].Journal of Huaqiao University(Natural Science),1995,16(2):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
[5]张奕鑫.活塞环槽定位销自动装配技术的研究　(Ⅱ)控制系统软件[J].华侨大学学报(自然科学版),1995,16(3):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (Ⅱ)Software of Control System[J].Journal of Huaqiao University(Natural Science),1995,16(2):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
[6]刘建春,张奕鑫.X8120数控改造的硬件设计[J].华侨大学学报(自然科学版),1998,19(1):61.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
　Liu Jianchun,Zhang Yixin.Hardware Design for Reconstructing Milling Machine X8120 into One of Numerical Control[J].Journal of Huaqiao University(Natural Science),1998,19(2):61.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
[7]尤芳怡,朱德友.水泥道板砖骨料定量加料控制系统硬件设计[J].华侨大学学报(自然科学版),2004,25(2):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]
　You Fangyi,Zhu Deyou.Hardware Design of a System for Controlling Quantitatively Feeding Raw Materials in Preparing Aggergate of Cement Brick Paving[J].Journal of Huaqiao University(Natural Science),2004,25(2):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]

更新日期/Last Update: 2014-03-22