[1]梁天德,黄传明.单片机测速仪的设计和研制[J].华侨大学学报(自然科学版),1992,13(3):401-407.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
　Liang Tiande,Huang Quanming,Department of,et al.The Design and Development of a Single-Chip Micro Computer-Operated Tachometer[J].Journal of Huaqiao University(Natural Science),1992,13(3):401-407.[doi:10.11830/ISSN.1000-5013.1992.03.0401]
点击复制

单片机测速仪的设计和研制()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第13卷
期数:
1992年第3期
页码:
401-407
栏目:
出版日期:
1992-07-20

文章信息/Info

Title:
The Design and Development of a Single-Chip Micro Computer-Operated Tachometer
作者:
梁天德; 黄传明
华侨大学电子工程系; 华侨大学电子工程系
Author(s):
Liang Tiande;  Huang Quanming;  Department of;  Electronic Engineering
关键词:
单片机;  转速表;  测周法;  测量精度
Keywords:
single-chip microcomputer;  tachometer;  method of measuring the cycles;  rate accuracy
DOI:
10.11830/ISSN.1000-5013.1992.03.0401
摘要:
本文介绍用测周法设计和研制出单片机测速仪的方法。该测速仪具有硬件电路简单,测速范围、测量精度及分辨力均高于目前转速表等优点。样机的试运行表明,这种测速装置已达实用阶段,具有推广价值。
Abstract:
The authors put for ward a single-chip microcomputer-operated tachometer designed by the method of measuring the cycles. The tachometer so designed and developed excels in its simple hardware circuit, wide range tachometric survey, high rate accuracy,and

相似文献/References:

[1]张秋凝.单片机开发装置[J].华侨大学学报(自然科学版),1989,10(1):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
　Zhang Qiuning.Single Chip Computer Developing Set[J].Journal of Huaqiao University(Natural Science),1989,10(3):94.[doi:10.11830/ISSN.1000-5013.1989.01.0094]
[2]郑耀林.车床加工工件线速度的单片机检测显示装置[J].华侨大学学报(自然科学版),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
　Zheng Yaolin.A Single Chip MicrocomPuter-Operated Device for Detecting and Displaying Linear Velocity of Workpiece on a Lathe[J].Journal of Huaqiao University(Natural Science),1991,12(3):348.[doi:10.11830/ISSN.1000-5013.1991.03.0348]
[3]张奕鑫.活塞环槽定位销自动装配技术研究　(I)控制系统硬件[J].华侨大学学报(自然科学版),1995,16(2):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (I) Hardware of Control system[J].Journal of Huaqiao University(Natural Science),1995,16(3):193.[doi:10.11830/ISSN.1000-5013.1995.02.0193]
[4]张奕鑫.活塞环槽定位销自动装配技术的研究　(Ⅱ)控制系统软件[J].华侨大学学报(自然科学版),1995,16(3):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
　Zhang Yixin.A Study on the Automatic Assembling Technique of Positioning Dowel in Piston Ring Slot (Ⅱ)Software of Control System[J].Journal of Huaqiao University(Natural Science),1995,16(3):295.[doi:10.11830/ISSN.1000-5013.1995.03.0295]
[5]尤芳怡,张奕鑫.自动丝网印花机控制系统硬件的研究[J].华侨大学学报(自然科学版),1997,18(2):177.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
　You Fangyi,Zhang Yixin.A Study on the Hardware of an Automatic Control System for a Silk Net Calico Press and Its Design[J].Journal of Huaqiao University(Natural Science),1997,18(3):177.[doi:10.11830/ISSN.1000-5013.1997.02.0177]
[6]刘建春,张奕鑫.X8120数控改造的硬件设计[J].华侨大学学报(自然科学版),1998,19(1):61.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
　Liu Jianchun,Zhang Yixin.Hardware Design for Reconstructing Milling Machine X8120 into One of Numerical Control[J].Journal of Huaqiao University(Natural Science),1998,19(3):61.[doi:10.11830/ISSN.1000-5013.1998.01.0061]
[7]尤芳怡,朱德友.水泥道板砖骨料定量加料控制系统硬件设计[J].华侨大学学报(自然科学版),2004,25(2):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]
　You Fangyi,Zhu Deyou.Hardware Design of a System for Controlling Quantitatively Feeding Raw Materials in Preparing Aggergate of Cement Brick Paving[J].Journal of Huaqiao University(Natural Science),2004,25(3):172.[doi:10.3969/j.issn.1000-5013.2004.02.016]

更新日期/Last Update: 2014-03-22