参考文献/References:
[1] 井平安,陈远洋,杨建新,等.基于在机测量的多轴蛋雕技术[J].装备制造技术,2021(2):33-35,47.DOI:10.3969/j.issn.1672-545X.2021.02.008.
[2] 谢宇宁,李汶谦,江磊.蛋雕艺术的传承现状与文创化发展[J].今古文创,2021(23):102-103.DOI:10.20024/j.cnki.cn42-1911/i.2021.23.047.
[3] 蔡安江,陈亮,杨冰,等.整体叶轮多轴加工工艺技术研究[C]//陕西省机械工程学会2014年论文汇编.南宁市:[s.n.],2022:29-32.DOI:10.26914/c.cnkihy.2022.006531.
[4] 郭文静.蛋壳雕刻艺术引入高中美术教学探究[D].武汉:华中师范大学,2019.
[5] 马宇峰,张宇.精密小型叶轮的多轴加工技术研究[J].现代制造工程,2021(5):111-115.DOI:10.16731/j.cnki.1671-3133.2021.05.018.
[6] 李文扬.利用多轴加工提高生产效率的实践与思考[J].现代制造技术与装备,2020,56(8):180-181.DOI:10.16107/j.cnki.mmte.2020.0786.
[7] 王锋,段性军.校企共建“多轴加工技术资源库”探索与研究[J].职业技术,2018,17(11):39-42.DOI:10.19552/j.cnki.issn1672-0601.2018.11.009.
[8] 王凌云,王丹,黄红辉,等.数控多轴加工技术课程任务驱动教学改革[J].科技资讯,2018,16(15):175-176.DOI:10.16661/j.cnki.1672-3791.2018.15.175.
[9] 王中医,姜鹏,李忠毅,等.负压输送中真空发生器真空度特性分析[J].机械制造与自动化,2021,50(5):200-202,214.DOI:10.19344/j.cnki.issn1671-5276.2021.05.054.
[10] 陈远洋,张余益,郭巍.基于精雕机的铣削课程创新[J].设备管理与维修,2020(23):120-121.DOI:10.16621/j.cnki.issn1001-0599.2020.12.63.
[11] 龚伟生.数控精雕机的开放式数控系统设计研究[J].现代制造技术与装备,2019(9):17-18.DOI:10.16107/j.cnki.mmte.2019.0871.
[12] 吴文涛.基于数控精雕机的氧化铝陶瓷板钻孔的工艺分析[J].江苏陶瓷,2018,51(5):17-18.DOI:10.16860/j.cnki.32-1251/tq.2018.05.009.
[13] 张余益,邢小颖,井平安,等.基于JDSoft SurfMill的蜡版模具制作方法探索[J].科技风,2022(31):79-81.DOI:10.19392/j.cnki.1671-7341.202231027.
[14] 陈永涛,汤润金,罗杜宇.镶件的高效精加工方案研究及实施[J].工程技术研究,2022,7(16):99-100,169.DOI:10.19537/j.cnki.2096-2789.2022.16.030.
[15] 王中医,姜鹏,李忠毅,等.负压输送中真空发生器真空度特性分析[J].机械制造与自动化,2021,50(5):200-202,214.DOI:10.19344/j.cnki.issn1671-5276.2021.05.054.
[16] 刘振伟,孙中圣.真空物料输送系统能耗对比研究[J].机械制造与自动化,2022,51(2):16-18,33.DOI:10.19344/j.cnki.issn1671-5276.2022.02.005.
[17] 赵国强.数控刀具补偿参数设定防错技术研究[J].制造技术与机床,2023(2):147-151.DOI:10.19287/j.mtmt.1005-2402.2023.02.022.
[18] 辛鹏.数控机床刀具柜智能化管理创新设计[J].机电信息,2023(7):43-45.DOI:10.19514/j.cnki.cn32-1628/tm.2023.07.010.