[1]陈爽,关纪文,梁淑嘉,等.约束条件下CFRP筋单轴抗压性能试验[J].华侨大学学报(自然科学版),2021,42(6):758-763.[doi:10.11830/ISSN.1000-5013.202009020]
　CHEN Shuang,GUAN Jiwen,LIANG Shujia,et al.Experiment on Uniaxial Compression Behaviors of CFRP Bars in Constraint Condition[J].Journal of Huaqiao University(Natural Science),2021,42(6):758-763.[doi:10.11830/ISSN.1000-5013.202009020]
点击复制

约束条件下CFRP筋单轴抗压性能试验()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第42卷
期数:
2021年第6期
页码:
758-763
栏目:
出版日期:
2021-11-12

文章信息/Info

Title:
Experiment on Uniaxial Compression Behaviors of CFRP Bars in Constraint Condition
文章编号:
1000-5013(2021)06-0758-06
作者:
陈爽1; 2;  关纪文1; 2;  梁淑嘉1; 2;  陈红梅1; 2
1. 桂林理工大学 广西建筑新能源与节能重点实验室, 广西 桂林 541004;2. 桂林理工大学 土木与建筑工程学院, 广西 桂林 541004
Author(s):
CHEN Shuang1; 2;  GUAN Jiwen1; 2;  LIANG Shujia1; 2;  CHEN Hongmei1; 2
1. Guangxi Key Laboratory of New Energy and Building Energy Saving, Guilin University of Technology, Guilin 541004, China; 2. Civil Engineering College, Guilin University of Technology, Guilin 541004, China
关键词:
碳纤维增强复合材料筋;  约束条件;  长细比;  抗压弹性模量
Keywords:
carbon fiber reinforced plastic bars;  constraint condition;  slenderness ratio;  compressive elastic modulus
分类号:
TU377.9
DOI:
10.11830/ISSN.1000-5013.202009020
文献标志码:
A
摘要:
对约束条件下3种直径的碳纤维增强复合材料(CFRP)筋进行单轴抗压性能试验,分析筋材长细比、直径对抗压强度、极限应变及抗压弹性模量的影响.结果表明:CFRP筋为典型的脆性材料,其破坏形态主要有剪切破坏、劈裂破坏、压碎破坏、屈曲破坏;直径相同的CFRP筋的抗压强度、极限应变及抗压弹性模量均随长细比的增大而降低;当长细比一定时,CFRP筋的极限应变随直径的增大而降低,但直径的变化对抗压强度和抗压弹性模量的影响甚微.
Abstract:
The uniaxial compression behaviors experiment on carbon fiber reinforced plastic(CFRP)bars of three diameters were carried out in constraint condition. The effects of slenderness ratio and diameter on the compressive strength, ultimate strain and compressive elastic modulus were analyzed. The results indicate that CFRP bar is typical brittle material, the failure patterns involve in shear failure, splitting failure, crushing failure and buckling failure. The compressive strength, ultimate strain and compressive elastic modulus of CFRP bars with the same diameter decrease with the increase of slenderness ratios. For the same slenderness ratio, the ultimate strain of CFRP bars decrease with the increase of diameter, but the variation of diameter effects little on the compressive strength and compressive elastic modulus.

参考文献/References:

[1] 陈爽,吕海波,王磊.纤维增强塑料筋与珊瑚混凝土粘结滑移本构模型[J].桂林理工大学学报,2019,39(1):107-113.DOI:10.3969/j.issn.1674-9057.2019.01.012
[2] AHMED A,GUO Shuaicheng,ZHANG Zuhua,et al.A review on durability of fiber reinforced polymer(FRP)bars reinforced seawater sea sand concrete[J].Construction and Building Materials,2020,256:119484.DOI:10.1016/j.conbuildmat.2020.119484.
[3] 董志强,吴刚.FRP筋增强混凝土结构耐久性能研究进展[J].土木工程学报,2019,52(10):1-19,29.DOI:10.15951/j.tmgcxb.2019.10.001.
[4] 徐扬,魏洋,程勋煜,等.碳纤维-箍筋约束倒角矩形混凝土柱的轴压性能[J].玻璃钢/复合材料,2019(6):5-11.DOI:10.3969/j.issn.1003-0999.2019.06.001.
[5] XU Jie,WANG Weixin,HAN Qinghua.Mechanical properties of pultruded high-temperature-resistant carbon-fiber-reinf-orced polymer tendons at elevated temperatures[J].Construction and Building Materials,2020,258:119526.DOI:10.1016/j.conbuildmat.2020.119526.
[6] 张世江,郭子雄,叶勇.CFRP筋增强板加固石梁受弯性能试验研究[J].建筑结构学报,2020,41(6):189-194,204.DOI:10.14006/j.jzjgxb.2018.0349.
[7] 李彪,杨勇新,赵进阶,等.结构工程用碳纤维复材筋力学性能影响因素试验研究[J].建筑结构,2020,50(2):72-75.DOI:10.19701/j.jzjg.2020.02.013.
[8] 彭小丽,徐玉野,王卫华.不同规范的RC梁抗剪加固式中CFRP抗剪贡献的计算方法比较[J].华侨大学学报(自然科学版),2012,33(6):676-683.DOI:10.11830/issn.1000-5013.2012.06.0676.
[9] 龚永智,张继文.CFRP筋增强混凝土偏心受压柱受力性能的试验研究[J].土木工程学报,2009,42(10):46-52.DOI:10.3321/j.issn:1000-131X.2009.10.007.
[10] 张新越,欧进萍.FRP加筋混凝土短柱受压性能试验研究[J].西安建筑科技大学学报(自然科学版),2006,38(4):467-472,485.DOI:10.3969/j.issn.1006-7930.2006.04.005.
[11] SIDDIQUI N,ABBAS H,ALMUSALLAM T,et al.Compression behavior of FRP-strengthened RC square columns of varying slenderness ratios undereccentric loading[J].Journal of Building Engineering,2020,32(11):1015 12.DOI:10.1016/j.jobe.2020.101512.
[12] YORESTA F S,MARUTA R,MIEDA G,et al.Unbonded CFRP strengthening method for buckling control of steel members[J].Construction and Building Materials,2020,241:118050.DOI:10.1016/j.conbuildmat.2020.118050.
[13] CAMPIONE G,CANNELLA F,FERROTTO M F,et al.Compressive behavior of FRP externally wrapped R.C.column with buckling effects of longitudinal bars[J].Engineering Structures,2018,168:809-818.DOI:10.1016/j.engstruct.2018.05.027.
[14] 朱春阳,王可心,孙天娇,等.考虑粘结滑移的FRP筋混凝土柱偏压性能[J].沈阳建筑大学学报(自然科学版),2020,36(2):220-228.DOI:10.11717/j.issn:2095-1922.2020.02.04.
[15] 郭容宽,唐迎春,饶晓文.FRP筋材加固矩形截面混凝土柱的极限强度分析[J].结构工程师,2018,34(5):142-148.DOI:10.3969/j.issn.1005-0159.2018.05.020.
[16] 龚永智,张继文,蒋丽忠,等.CFRP筋增强混凝土轴心受压柱的试验研究[J].工业建筑,2010,40(7):67-70.DOI:10.13204/j.gyjz201007018.

相似文献/References:

[1]欧阳义为,王全凤.多层框架动力优化[J].华侨大学学报(自然科学版),1996,17(3):266.[doi:10.11830/ISSN.1000-5013.1996.03.0266]
　Ouyang Yiwei,Wang Quanfeng.Dynamic Optimization of Multistoried Framework[J].Journal of Huaqiao University(Natural Science),1996,17(6):266.[doi:10.11830/ISSN.1000-5013.1996.03.0266]
[2]吴善和.带约束的一类循环和不等式[J].华侨大学学报(自然科学版),2004,25(2):133.[doi:10.3969/j.issn.1000-5013.2004.02.006]
　Wu Shanhe.A Class of Cyclic Sum Inequalities with Constraint[J].Journal of Huaqiao University(Natural Science),2004,25(6):133.[doi:10.3969/j.issn.1000-5013.2004.02.006]
[3]黄庆丰.一种改进的Wilson-θ法及其计算稳定性[J].华侨大学学报(自然科学版),2010,31(2):205.[doi:10.11830/ISSN.1000-5013.2010.02.0205]
　HUANG Qing-feng.An Improved Wilson-θ Method and Its Calculation Stability[J].Journal of Huaqiao University(Natural Science),2010,31(6):205.[doi:10.11830/ISSN.1000-5013.2010.02.0205]

备注/Memo

备注/Memo:
收稿日期: 2020-09-08
通信作者: 陈爽(1981-),男,副教授,博士,主要从事新型建筑材料、混凝土结构耐久性及力学性能的研究.E-mail:gjw_dd@163.com.
基金项目: 国家自然科学基金资助项目(51568013); 广西高等学校高水平创新团队及卓越学者计划(2017年); 广西高校中青年教师科研基础能力提升项目(2021KY0338); 广西建筑新能源与节能重点实验室开放基金资助项目(桂科能19-J-21-3)
更新日期/Last Update: 2021-11-20