[1]吴铭禧,房怀英,杨建红,等.变产量下扬料叶片对干燥滚筒料帘分布的影响特性[J].华侨大学学报(自然科学版),2019,40(1):9-13.[doi:10.11830/ISSN.1000-5013.201809034]
　WU Mingxi,FANG Huaiying,YANG Jianhong,et al.Influence of Lifting Blade on Distribution of Rotary Dryer Material Curtain Under Variable Output[J].Journal of Huaqiao University(Natural Science),2019,40(1):9-13.[doi:10.11830/ISSN.1000-5013.201809034]
点击复制

变产量下扬料叶片对干燥滚筒料帘分布的影响特性()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第40卷
期数:
2019年第1期
页码:
9-13
栏目:
出版日期:
2019-01-20

文章信息/Info

Title:
Influence of Lifting Blade on Distribution of Rotary Dryer Material Curtain Under Variable Output
文章编号:
1000-5013(2019)01-0009-05
作者:
吴铭禧;  房怀英;  杨建红;  陆杨
华侨大学 机电及自动化学院, 福建 厦门 361021
Author(s):
WU Mingxi;  FANG Huaiying;  YANG Jianhong;  LU Yang
College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
关键词:
变产量;  干燥滚筒;  料帘分布;  扬料叶片
Keywords:
variable production;  rotary dryer;  material curtain distribution;  lifting blades
分类号:
U415.52
DOI:
10.11830/ISSN.1000-5013.201809034
文献标志码:
A
摘要:
搭建单叶片滚筒料帘实验平台,通过可移动的接料装置评价每个位置的料帘分布,并采用料帘变异系数构建料帘分布评价模型.研制6种结构的叶片,对每种叶片的料帘分布特性和变产量特性进行实验研究,得到适合变产量特性的叶片结构形式.实验结果表明:V字缺口叶片是6种叶片中料帘分布最佳、最适应变产量要求的叶片.
Abstract:
A single blade roller material curtain experimental platform was set up, the material curtain distribution of which at each position was evaluated by using a movable material receiving device. The material curtain variation coefficient was used to construct the material curtain distribution evaluation model. Six kinds of blades with different structures were developed. The distribution characteristics and variable production characteristics of the material curtain of each blade were studied experimentally, and the form of the blade structure suitable for the variable production characteristic was obtained. The experimental results show that the blade with V-notch is the optimal structure for material curtain distribution, and is most suitable for variable production requirements.

参考文献/References:

[1] 秦强,李志刚.滚筒烘干机筒体结构对烘干物料的影响[J].中国高新技术企业,2015(21):41-42.DOI:10.13535/j.cnki.11-4406/n.2015.21.021.
[2] 张晨光,焦生杰,谢立扬,等.沥青搅拌设备烘干筒料帘密度建模及仿真[J].华中科技大学学报(自然科学版),2017,45(5):55-60.DOI:10.13245/j.hust.170511.
[3] PITON M,HUCHET F,LE CORRE O,et al.A coupled thermal-granular model in flights rotary kiln: Industrial validation and process design[J].Applied Thermal Engineering,2015,75:1011-1021.DOI:10.1016/j.applthermaleng.2014.10.052.
[4] SCHERER V,MÖNNIGMANN M,BERNER M O,et al.Coupled DEM-CFD simulation of drying wood chips in a rotary drum: Baffle design and model reduction[J].Fuel,2016,184:896-904.DOI:10.1016/j.fuel.2016.05.054.
[5] XIE Qiang,CHEN Zuobing,MAO Ya,et al.Case studies of heat conduction in rotary drums with L-shaped lifters via DEM[J].Case Studies in Thermal Engineering,2018,11:145-152.DOI:10.1016/j.csite.2018.02.001.
[6] 刘磊.沥青搅拌设备烘干筒物料升温影响因素分析[D].西安:长安大学,2011.
[7] 王雪.沥青搅拌设备烘干筒骨料运动学分析[D].西安:长安大学,2011.
[8] 韩宝庆.沥青料烘干滚筒结构设计及物料升温因素仿真分析[D].西安:长安大学,2014.
[9] 郭永亮.搅拌设备烘干筒叶片对骨料加热特性影响研究[D].西安:长安大学,2012.
[10] 石拓.沥青搅拌设备烘干筒结构分析与优化[D].西安:长安大学,2017.
[11] 沈杭,杨建红,张认成,等.干粉站用干燥滚筒离散元仿真分析与试验研究[J].机械设计,2016,33(8):67-71.DOI:10.13841/j.cnki.jxsj.2016.08.013.
[12] 刘立强.基于CFD-DEM耦合方法烘干筒传热过程仿真[D].西安:长安大学,2017.
[13] 黄文景,杨建红,王小宁.滚筒干燥器能耗分析及参数优化设计[J].筑路机械与施工机械化,2017,34(1):81-86.DOI:10.3969/j.issn.1000-033X.2017.01.016.
[14] VAN PUYVELDE D R.Modelling the hold up of lifters in rotary dryers[J].Chemical Engineering Research and Design,2009,87(2):226-232.DOI:10.1016/j.cherd.2008.08.018.
[15] KARALI M A,SUNKARA K R,HERZ F,et al.Experimental analysis of a flighted rotary drum to assess the optimum loading[J].Chemical Engineering Science,2015,138:772-779.DOI:10.1016/j.ces.2015.09.004.
[16] KARALI M A,HERZ F,SPECHT E,et al.Comparison of image analysis methods to determine the optimum loading of flighted rotary drums[J].Powder Technology,2016,291:147-153.DOI:10.1016/j.powtec.2015.11.053.
[17] 李小聪.稻秸秆对行抛撒装置设计与试验[D].长沙:湖南农业大学,2016.

备注/Memo

备注/Memo:
收稿日期: 2018-09-18
通信作者: 房怀英(1978-),女,副教授,博士,主要从事高端机制砂产品的研究.E-mail:happen@hqu.edu.cn.
基金项目: 国家国际合作项目(2015DFA710402); 福建省产学合作重大项目(2016H6013); 福建省泉州市科技计划项目(2018C100R)
更新日期/Last Update: 2019-01-20