[1]许建民,顾立志.五轴端铣锥形摆线齿轮齿形的数值模拟与试验(英文)[J].华侨大学学报(自然科学版),2018,39(6):807-815.[doi:10.11830/ISSN.1000-5013.201804090]
　XU Jianmin,GU Lizhi.Numerical Simulation and Experimental Study of Conical Cycloid Gear Profile in Face Milling on Five-Axis Milling Machine Tool[J].Journal of Huaqiao University(Natural Science),2018,39(6):807-815.[doi:10.11830/ISSN.1000-5013.201804090]
点击复制

五轴端铣锥形摆线齿轮齿形的数值模拟与试验(英文)()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第39卷
期数:
2018年第6期
页码:
807-815
栏目:
出版日期:
2018-11-20

文章信息/Info

Title:
Numerical Simulation and Experimental Study of Conical Cycloid Gear Profile in Face Milling on Five-Axis Milling Machine Tool
文章编号:
1000-5013(2018)06-0807-09
作者:
许建民1;  顾立志2
1. 厦门理工学院 机械与汽车工程学院, 福建 厦门 361024;2. 华侨大学 机电及自动化学院, 福建 厦门 361021
Author(s):
XU Jianmin1;  GU Lizhi2
1. School of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen 361024, China; 2. College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
关键词:
锥形摆线齿轮;  端铣;  前倾角和侧倾角;  试验验证
Keywords:
conical cycloid gear;  face milling;  front inclination angle and tilt angle;  experimental verification
分类号:
U491.17
DOI:
10.11830/ISSN.1000-5013.201804090
文献标志码:
A
摘要:
为了提高锥形摆线齿轮齿面的加工质量和效率,提出端铣锥形摆线齿轮的工艺技术.建立端铣刀有效切削椭圆的数学模型,提出利用前倾角和侧倾角分别解决端铣刀局部干涉与刀杆碰撞干涉问题的方法.建立端铣锥形摆线齿轮的几何模型和五轴数控仿真模型,获得其刀具轨迹.数控仿真结果表明:各参数设置合理,加工轨迹均匀顺畅,无加工干涉.在五轴数控铣床上利用端面铣刀实现精密锥形摆线齿轮的无过切加工,验证端铣锥形摆线齿轮的加工方法的可行性和有效性.
Abstract:
In order to improve processing surface quality and efficiency of the conical cycloidal gear, the techniques of face-milling conical cycloidal gears were presented. The mathematical model of the effective cutting ellipse of the face mill was established. The front inclination angle and tilt angle were employed to solve the problems of local interference and global interference respectively. The geometrical model and five-axis numerical control(NC)simulation model of face-milling conical cycloid gear were then established accordingly, and the optimal tool path was obtained. NC simulation shows that the parameters are set reasonably, the machining track is even and smooth, and there is no interference. Finally, the face milling cutter was used to realize the machining of the precision conical cycloidal gear on the five-axis computer numerical control(CNC)milling machine tool,which has verified the feasibility and effectiveness of the machining method of milling conical cycloidal gear with face mill.

参考文献/References:

[1] WANG Weishiang,FONG Zhanghua.A dual face-hobbing method for the cycloidal crowning of spur gears[J].Mechanism and Machine Theory,2008,43(11):1416-1430.DOI:10.1016/j.mechmachtheory.2007.11.007.
[2] WANG Weishiang,FONG Zhanghua.Undercutting and contact characteristics of longitudinal cycloidal spur gears generatedby the dual face-hobbing method[J].Mechanism and Machine Theory,2011,46(4):399-411.DOI:10.1016/j.mechmachtheory.2010.12.005.
[3] 刘殿忠,田嘉.用少齿差行星传动机构实现短幅外摆线齿形的范成磨削装置[J].煤矿机械,2004,25(8):72-74.DOI:10.13436/j.mkjx.2004.08.036.
[4] 蒋旭君.新型锥形摆线轮行星传动制造关键技术研究[D].重庆:重庆大学,2005.DOI:10.7666/d.d021637.
[5] 陈兵奎,胡俊章,李朝阳.基于双圆弧法的摆线针轮数控编程系统设计[J].重庆大学学报,2009,32(11):1246-1251.
[6] 戚厚军,吕利辉,张大卫,等.摆线轮结构件高速铣削过程中铣削力的有限元仿真分析[J].机械科学与技术,2010,29(1):17-23.DOI:10.13433/j.cnki.1003-8728.2010.01.003.
[7] 刘令涛,焦永和,张春林.范成法加工内平动全摆线齿轮分析[J].机械设计,2010,27(4):65-68.DOI:10.13841/j.cnki.jxsj.2010.04.010.
[8] 王淑妍,周可可,陈兵奎,等.锥形摆线轮磨削加工方法研究[J].现代制造工程,2011(5):101-104.DOI:10.3969/j.issn.1671-3133.2011.05.027.
[9] 陈兵奎,王淑妍,蒋旭君,等.锥形摆线啮合副加工方法[J].机械工程学报,2007,43(1):147-151.DOI:10.3321/j.issn:0577-6686.2007.01.024.
[10] STEPHEN P R.A closed-form solution to the problem of optimal tool-path generation for sculptured surface machining on multi-axis NC machine[J].Mathematical and Computer Modeling,2006,43(3/4):222-243.DOI:10.1016/j.mcm.2004.08.014.
[11] JENSEN C G,RED W E,PI J.Tool selection for five-axis curvature matched machining[J].Computer-Aided Design,2001,34(3):251-266.DOI:10.1016/S0010-4485(01)00086-0.
[12] 李万军,赵东标,牛敏,等.五轴加工全局干涉检查及其避免[J].计算机集成制造系统,2011,17(5):1011-1016.DOI:10.13196/j.cims.2011.05.117.liwj.012.
[13] 洪海涛,于东,张立先,等.五轴端铣加工中3D刀具半径补偿研究[J].中国机械工程,2009,20(15):1770-1774.
[14] 王峰,林浒,郑飂默,等.五轴端铣3D刀补中运动突变的处理[J].机械工程学报,2013,49(13):108-115.DOI:10.3901/JME.2013.13.108.
[15] 樊宏周,席光.基于平底刀端铣的叶轮流道底面精铣算法研究[J].机械工程学报,2011,47(11):148-154.DOI:10.3901/JME.2011.11.148.
[16] 赵世田,赵东标,付莹莹,等.改进的等残余高度加工自由曲面刀具路径生成算法[J].南京航空航天大学学报,2012,44(2):240-245.DOI:10.3969/j.issn.1005-2615.2012.02.017.
[17] 祁杨停,黄常标,林俊锋.三角网格模型五轴加工刀轴矢量调整及优化[J].华侨大学学报(自然科学版),2014,35(5):481-486.DOI:10.11830/ISSN.1000-5013.2014.05.0481.
[18] 许建民,罗善明,廖龙兴.五轴端铣摆线齿轮刀具轨迹规划及试验研究[J].机械科学与技术,2017,36(1):74-82.DOI:10.13433/j.cnki.1003-8728.2017.0111.
　　

备注/Memo

备注/Memo:
收稿日期: 2018-04-28
通信作者: 顾立志(1956-),男,教授,博士,主要从事数字化设计制造的研究.E-mail:gulizhi888@163.com.
基金项目: 国家自然科学基金资助项目(51375411); 福建省科技计划引导性重点项目(2017H0034); 福建省中青年教师教育科研基金资助项目(JT180445); 厦门理工学院高层次人才项目(YKJ16029R)
更新日期/Last Update: 2018-11-20