[1]乔虎,冯帆,杜江,等.应用Kano模型的闭环产品聚类配置方法[J].华侨大学学报(自然科学版),2018,39(3):349-354.[doi:10.11830/ISSN.1000-5013.201712008]
　QIAO Hu,FENG Fan,DU Jiang,et al.Method of Closed-Loop Products Cluster Configuration Using Kano Model[J].Journal of Huaqiao University(Natural Science),2018,39(3):349-354.[doi:10.11830/ISSN.1000-5013.201712008]
点击复制

应用Kano模型的闭环产品聚类配置方法()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第39卷
期数:
2018年第3期
页码:
349-354
栏目:
出版日期:
2018-05-20

文章信息/Info

Title:
Method of Closed-Loop Products Cluster Configuration Using Kano Model
文章编号:
1000-5013(2018)03-0349-06
作者:
乔虎1;  冯帆1;  杜江1;  李存良2
1. 西安工业大学 机电工程学院, 陕西 西安 710021;2. 轻工业西安机械设计研究院, 陕西 西安 710086
Author(s):
QIAO Hu1;  FENG Fan1;  DU Jiang1;  LI Cunliang2
1. School of Mechatronic Engineering, Xi’an Technology University, Xi’an 710021, China; 2. Light Industrial Xi’an Mechanic Design Research Institute, Xi’an 710086, China
关键词:
产品配置;  卡诺模型;  设计结构矩阵;  民用无人机
Keywords:
product configuration;  Kano model;  design structure matrix;  civillian drone
分类号:
TP391
DOI:
10.11830/ISSN.1000-5013.201712008
文献标志码:
A
摘要:
为解决产品配置过程中各零部件属性互为约束、无法分解的问题,引入闭环产品概念及其形式化表述.首先,以客户需求为基础,利用卡诺(Kano)模型快速拆解闭环产品约束,确定产品配置方向;然后,以设计结构矩阵(DSM)为工具,求解产品配置问题;最后,以民用无人机配置过程为例,验证该方法可完成闭环产品的配置,具有一定的可行性和有效性.
Abstract:
In order to solve the problem that the co-constraints of the attributes among the parts are unable to decomposed in the process of product configuration, the concept of closed-loop product and its formal description were introduced. Firstly, the Kano model was used to decompose the co-constraints based on the demand of customers and confirm the direction of production configuration. Then, the problem of product configuration was solved by using the tool of the design structure matrix(DSM). Finally, the proposed method was used to finish the configuration of closed-loop product in process of configuration of civilian drone, which shows good feasibility and effectiveness.

参考文献/References:

[1] QIU Lemiao,LIU Xiaojian,ZHANG Shuyou,et al.Disassemblability modeling technology of configurable product based on disassembly constraint relation weighted design structure matrix(DSM)[J].Chinese Journal of Mechanical Engineering,2014,27(3):511-519.DOI:10.3901/CJME.2014.03.511.
[2] 盛步云,汪星刚,萧筝,等.基于客户需求分析的模块化产品配置方法[J].计算机集成制造系统,2017,23(10):2091-2100.DOI:10.13196/j.cims.2017.10.002.
[3] LAN R,RONALD S M.Mass customization: The next industrial revolution[J].Industrial Management,1995,37(5):18-19.
[4] 王世伟,谭建荣,张树有,等.基于GBOM的产品配置研究[J].计算机辅助设计与图形学学报,2004,16(5):655-659.DOI:10.3321/j.issn:1003-9775.2004.05.010.
[5] 包志炎,计时鸣,阮曙峰.基于蜂群进化机制的产品配置技术研究[J].农业机械学报,2014,45(1):328-334.DOI:10.6041/j.issn.1000-1298.2014.01.050.
[6] 乔虎,莫蓉,向颖,等.一种自创生产品配置模型构建方法[J].计算机集成制造系统,2015,21(9):2277-2286.DOI:10.13196/j.cims.2015.09.003.
[7] 任彬,张树有,伊国栋.基于模糊多属性决策的复杂产品配置方法[J].机械工程学报,2010,46(19):108-116.DOI:10.3901/JME.2010.19.108.
[8] 张萌,李国喜,龚京忠,等.基于三维模型的产品模块化配置方法[J].计算机集成制造系统,2012,18(11):2370-2380.DOI:10.13196/j.cims.2012.11.18.zhangm.020.
[9] KANO N,SERAKU N,TAKAHASHI F,et al.Attractive quality and must be quality[J].Journal of the Japanese Society for Quality Control,1984,4(2):147-156.DOI:10.20684/quality.14.2_147.
[10] 孟庆良,邹农基,李晓萍,等.基于分析型KANO模型的物流服务质量提升决策方法[J].运筹与管理,2012,21(2):64-73.DOI:10.3969/j.issn.1007-3221.2012.02.011.
[11] BERGER C.Kano’s methods for understanding customer-defined quality[J].Center for Quality Management Journal,1993,2(4):3-36.
[12] XU Qianli,JIAO R J,YANG Xi,et al.An analytical Kano model for customer need analysis[J].Design Studies,2009,30(1):87-110.DOI:10.1016/j.destud.2008.07.001.
[13] 邵伟平,刘永贤,郝永平,等.基于分布式约束满足的产品配置研究[J].东北大学学报(自然科学版),2007,28(1):103-106.DOI:10.3321/j.issn:1005-3026.2007.01.026.
[14] LI S.A matrix-based clustering approach for the decomposition of design problems[J].Research in Engineering Design,2011,22(4):263-278.DOI:10.1007/s00163-011-0111-z.
[15] LI S,MIRHOSSEINI M.A matrix-based modularization approach for supporting secure collaboration in parametric design[J].Computers in Industry,2012,63(6):619-631.DOI:10.1016/j.compind.2012.04.003.
[16] BROWNING T R.Applying the design structure matrix to system decomposition and integration problems: A review and new directions[J].IEEE Transactions on Engineering Management,2001,48(3):292-306.DOI:10.1109/17.946528.
[17] 何睿,唐敦兵,薛建彬.基于设计结构矩阵的工程变更传播研究[J].计算机集成制造系统,2008,14(4):656-660.DOI:10.13196/j.cims.2008.04.34.her.001.
[18] 刘建刚,唐敦兵,杨春,等.基于物理DSM与行列变换的产品结构聚类划分[J].系统工程与电子技术,2008,30(10):1904-1908.DOI:10.3321/j.issn:1001-506X.2008.10.022.

备注/Memo

备注/Memo:
收稿日期: 2017-12-07
通信作者: 乔虎(1986-),男,讲师,博士,主要从事数字化设计制造及三维模型检索与重用方面的研究.E-mail:qiaonwpu@hotmail.com.
基金项目: 国家自然科学基金资助项目(51705392); 西安工业大学校长基金资助项目(XAGDXJJ16004)
更新日期/Last Update: 2018-05-20