[1]周平.直缝焊管自动超声探伤系统设计[J].华侨大学学报(自然科学版),2016,37(2):145-148.[doi:10.11830/ISSN.1000-5013.2016.02.0145]
　ZHOU Ping.Design of Automatic Ultrasonic Inspection System of Longitudinal Welded Pipe[J].Journal of Huaqiao University(Natural Science),2016,37(2):145-148.[doi:10.11830/ISSN.1000-5013.2016.02.0145]
点击复制

直缝焊管自动超声探伤系统设计()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第37卷
期数:
2016年第2期
页码:
145-148
栏目:
出版日期:
2016-03-20

文章信息/Info

Title:
Design of Automatic Ultrasonic Inspection System of Longitudinal Welded Pipe
文章编号:
1000-5013(2016)02-0145-04
作者:
周平
江西工程学院 机电工程学院, 江西 新余 338000
Author(s):
ZHOU Ping
Jiangxi College of Engineering, School of Mechanical and Electrical Engineering, Xinyu 338000, China
关键词:
直缝焊管;  超声探伤;  可编程控制器;  触摸屏
Keywords:
longitudinal welded pipe;  ultrasonic inspection;  programmable logic controller;  touch screen
分类号:
TH39;TG115.285
DOI:
10.11830/ISSN.1000-5013.2016.02.0145
文献标志码:
A
摘要:
针对直缝焊管生产中传统应用手工探伤效率低、故障率高等问题,利用超声无损探伤精度高、速度快的优点,构建以可编程控制器(PLC)为核心的直缝焊管自动超声探伤系统.提出该系统的工艺参数和系统机械构成,设计系统的PLC控制硬件、PLC程序流程及PLC控制程序.系统的操作监控硬件选用台达触摸屏,给出基于Windows系统触摸屏编程软件设计的人机操作监控画面.运行结果显示:该系统结构稳定、可靠.
Abstract:
Aiming at the problem of low manual detection efficiency and high failure rate in traditional longitudinal welded pipe production, using the advantages of high accuracy, high speed of ultrasonic nondestructive testing, taking the programmable controller(PLC)as the core, a set of automatic ultrasonic inspection system of the longitudinal welded pipe is designed. The paper summarizes the longitudinal-seam welded pipe automatic ultrasonic inspection system. The process parameters and the mechanical structure of the system are put forward, and the PLC control hardware, program flow and control procedures of the system are designed accordingly. A touch screen is chosen for system operation monitoring, and the man-machine operation monitoring picture based on the touch screen programming software design of the Windows system is given.

参考文献/References:

[1] 屈晓阳.大型直缝焊管JCOE成形工艺及CAPP系统研究[D].秦皇岛:燕山大学,2012:1-10.
[2] FRYER M,TAIT P,KYRIAKIDES S,et al.The prediction and enhancement of UOE-DSAW collapse resistance for deepwater linepipe[C]//Proceedings of the Fifth Biennial International Pipeline Conference.Calgary:ASME,2004:1961-1966.
[3] KYRIAKIDES S,CORONA E,FISCHER F J.On the effect of the U-O-E manufacturing process on the collapse pressure of long tubes[J].Journal of Engineering for Industry,1994,116(1):93-100.
[4] AL-SHARIF A M,PRESTON R.Improvement in UOE pipe collapse resistance by thermal aging[C]//Proceeding of the Offshore Technology Conference.Houston:Richardson,1996:579-588.
[5] SUZUKI M,ENDO S,SUGA M.Effect of PWHT on flash butt welded joint of TMCP steel UOE pipe[C]//Proceedings of the 8th International Conference on Offshore Mechanics and Arctic Engineering Symposium.Hague:American Society of Mechanical Engineers,1989:277-283.
[6] 王晓香.我国油气长输管线用焊接钢管生产技术的发展与展望[J].钢管,2004,33(3):7-13.
[7] 刘镇清,景永刚.增强超声探伤信号的分离谱处理方法[J].无损检测,2001,23(3):132-135.
[8] 郑熙,侯力,王裕林,等.厚壁无缝钢管的超声波检测系统[J].机械设计与制造,2010(7):90-92.
[9] 涂葵.薄壁小径管焊接接头超声波探伤[J].江西冶金,2013,33(2):40-42.
[10] 孙红磊,赵军.大型管件JCOE成形智能化控制中的材料性能参数识别[J].燕山大学学报,2011,35(3):223-226.
[11] 廖常初.可编程序控制器的编程方法与工程应用[M].重庆:重庆大学出版社,2010:1-30.
[12] 李跃进,苏钢.电气自动控制新技术在?340 mm直缝焊管机组上的应用[J].焊管,2002,25(6):45-46.
[13] 骆国平,纪建军.基于西门子611A的钢管对接位置闭环控制系统[J].控制工程,2008(增刊2):94-95.
[14] 丁旭升,林彬泉,杨青兰.基于PLC的钢管自动超声探伤控制系统的设计[J].机电工程技术,2009,38(7):20-22.
[15] 海心,马银忠,刘树青.西门子PLC开发入门与典型事例[M].北京:人民邮电出版社,2010:120-139.
[16] 赵心,朱军,张环宇,等.基于PLC的螺旋焊管自动优化剪切系统的设计[J].机械设计与制造,2013(7):50-52.
[17] 金英姬.基于PLC与触摸屏实现液压教学实验台控制系统的研究[J].实验技术与管理,2012,29(4):151-154.
[18] 田龙,冯湛清.PLC和触摸屏的压力式自动喷涂系统设计[J].制造业自动化,2007,29(6):64-66.
[19] 齐鹏飞,罗继亮,陈雪琨.PLC程序形式化的设计与验证[J].华侨大学学报(自然科学版),2013(3):241-246.
[20] 彭彦卿.人机界面的开发与应用[J].鹭江职业大学学报,2004,12(4):82-85.

备注/Memo

备注/Memo:
收稿日期: 2015-12-22
通信作者: 周平(1970-),男,副教授,主要从事自动化和机电技术的研究.E-mail:2865181276@qq.com.
基金项目: 江西省教育厅科技项目(GJJ14815)
更新日期/Last Update: 2016-03-20