[1]蔡应强,陈清林,丁旭光.轮式装载机前车架的有限元分析与结构优化[J].华侨大学学报(自然科学版),2016,37(1):27-31.[doi:10.11830/ISSN.1000-5013.2016.01.0027]
　CAI Yingqiang,CHEN Qinglin,DING Xuguang.Finite Element Analysis and Structural Optimization of the Front Frame of Wheel Loader[J].Journal of Huaqiao University(Natural Science),2016,37(1):27-31.[doi:10.11830/ISSN.1000-5013.2016.01.0027]
点击复制

轮式装载机前车架的有限元分析与结构优化()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第37卷
期数:
2016年第1期
页码:
27-31
栏目:
出版日期:
2016-01-03

文章信息/Info

Title:
Finite Element Analysis and Structural Optimization of the Front Frame of Wheel Loader
文章编号:
1000-5013(2016)01-0027-05
作者:
蔡应强1; 2; 3;  陈清林2; 3;  丁旭光2; 3
1. 华侨大学 机电及自动化学院, 福建 厦门 361021;2. 集美大学 轮机工程学院, 福建 厦门 361021;3. 福建省船舶与海洋工程重点实验室, 福建 厦门 361021
Author(s):
CAI Yingqiang1; 2; 3;  CHEN Qinglin2; 3;  DING Xuguang2; 3
1. College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China; 2. School of Marine Engineering, Jimei University, Xiamen 361021, China; 3. Fujian Provincial Key Laboratory of Naval Architecture and Ocean Engineering, Xiamen 361021, China
关键词:
装载机;  前车架;  有限元;  优化
Keywords:
loader;  front frame;  finite element;  optimization
分类号:
TH243.1;O242.21
DOI:
10.11830/ISSN.1000-5013.2016.01.0027
文献标志码:
A
摘要:
以某ZL50装载机前车架为研究对象,利用Pro/E软件建立三维实体模型,导入ABAQUS软件建立有限元模型.基于载荷-时间历程的动态有限元分析,获得典型工况下的前车架应力分布云图.结果表明:在举升和卸载工况下,局部结构应力峰值过大,应力集中位置较多;在应力集中位置增设加强筋和过渡圆角,并对加强筋板厚度进行优化后,前车架受力状况得到明显改善,应力集中现象得以消除,安全系数提高近200%.
Abstract:
Taking ZL50 loader as the research object, 3D model was created by the Pro/E software. By importing the model to the ABAQUS software, the finite element model was established. Based on the dynamic finite element analysis of the loading-time course, the stress distribution graph of the front frame under typical working conditions was obtained. The results show that the local structural stress peak was too large and stress concentration points were too many under lifting and unloading working conditions. Increasing the reinforcing rib and the transition fillet at the stress concentration points, and optimizing the thickness of the reinforcing rib, the stress status of the front frame was obviously improved. The stress concentration phenomenon was eliminated. The safety coefficient was improved about 200%.

参考文献/References:

[1] 李延斌,姜彤,谷建国,等.XG958轮式装载机车架等强度优化设计[J].沈阳工业大学学报,2013,35(6):657-661.
[2] 王继新,沈勇,胡季.基于虚拟零件轮式装载机前车架有限元分析[J].煤矿机械,2010,31(4):93-95.
[3] 王虎奇,陈树勋.基于ADAMS的装载机前车架有限元分析载荷求解[J].机械设计与制造,2007(3):64-66.
[4] 朱峰.装载机结构件有限元分析与结构改进[D].长春:吉林大学,2009:25-27.
[5] 曹博涛,李小莹,杨勇强.装载机工作装置三维建模及有限元分析[J].煤矿机械,2014,35(5):105-107.
[6] 李英杰,刘卫国,于涛,等.利用APDL的大型起重机关键结构件有限元分析[J].现代制造工程,2014(7):165-173.
[7] 张卡德,黄致建,郝艳华.振动筛机架结构的优化设计[J].华侨大学学报(自然科学版),2010,31(4):363-366.
[8] 石光林,陈树勋,梁光明,等.导重准则法在前车架结构优化设计中的应用[J].中国工程机械学报,2008,6(2):139-143.
[9] 陈树勋,韦齐峰,黄锦成.结构优化导重准则及其意义与合理性[J].固体力学学报,2013,34(6):628-637.
[10] 胡旭林.基于虚拟样机技术的装载机前车架承载分析[J].煤矿机械,2013,34(4):129-131.

相似文献/References:

[1]陈扼西,冯培锋,龚志坚,等.一种装载机工作装置电比例操纵器的研制[J].华侨大学学报(自然科学版),2005,26(2):176.[doi:10.3969/j.issn.1000-5013.2005.02.017]
　Chen Exi,Feng Peifeng,Gong Zhijian,et al.Development of an Electric Proportional Joystick for the Use of Loader’s Working Devices[J].Journal of Huaqiao University(Natural Science),2005,26(1):176.[doi:10.3969/j.issn.1000-5013.2005.02.017]

备注/Memo

备注/Memo:
收稿日期: 2015-09-22
通信作者: 蔡应强(1980-),男,讲师,博士研究生,主要从事船舶、机械设备的机电液一体化设计及虚拟仿真的研究.E-mail:cai0929@126.com.
基金项目: 交通部应用基础研究项目(2014329815100); 福建省高校产学研重大项目(2014H6020)
更新日期/Last Update: 2016-01-20