[1]谢北萍,刘斌.采用模腔压力曲线的注塑成型实验[J].华侨大学学报(自然科学版),2014,35(6):611-615.[doi:10.11830/ISSN.1000-5013.2014.06.0611]
　XIE Bei-ping,LIU Bin.Experimental Study on Injection MoldingUsing Cavity Pressure Curve[J].Journal of Huaqiao University(Natural Science),2014,35(6):611-615.[doi:10.11830/ISSN.1000-5013.2014.06.0611]
点击复制

采用模腔压力曲线的注塑成型实验()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第35卷
期数:
2014年第6期
页码:
611-615
栏目:
出版日期:
2014-11-20

文章信息/Info

Title:
Experimental Study on Injection MoldingUsing Cavity Pressure Curve
文章编号:
1000-5013(2014)06-0611-05
作者:
谢北萍;  刘斌
华侨大学 机电及自动化学院, 福建 厦门 361021
Author(s):
XIE Bei-ping;  LIU Bin
College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
关键词:
注塑成型;  压力传感器;  模腔压力曲线;  注塑工艺参数
Keywords:
injection molding;  pressure sensor;  cavity pressure curve;  injection molding process parameter
分类号:
Q320.662
DOI:
10.11830/ISSN.1000-5013.2014.06.0611
文献标志码:
A
摘要:
通过模腔压力传感器测量模腔压力,研究模具不同部位的模腔压力曲线,测量注塑过程中的模腔压力和塑料制品残余应力,研究模腔压力曲线与塑料制品残余应力的关系.在此基础上,探讨注射压力和保压压力对模腔压力曲线形状的影响规律.实验结果表明:模腔压力曲线和塑料制品残余应力、注塑工艺参数有很大的关系.
Abstract:
Cavity pressure was measured by cavity pressure sensor to study cavity pressure in different position of injection mold. Cavity pressure and plastic part residual stress during the molding process were measured to study the relationship between them. On the basis, the effects of injection pressure and packing pressure on cavity pressure curve configuration were discussed. The experiment result shows that cavity pressure has a close connection with plastic part residual stress and injection parameters.

参考文献/References:

[1] 陈金伟,徐百平.模腔压力曲线在注塑工艺参数优化中的应用[J].工程塑料应用,2010,38(3):28-31.
[2] 郑荣成,STAHL J,KOCH F.模腔压力曲线必须正确[J].国外塑料,2007,25(7):67-70.
[3] 朱光力,李继中.透明塑料制品内应力检测仪设计与应用[J].机床与液压,2008,36(7):258-260.
[4] KURT M,KAMBER O S,KAYNAK Y,et al.Experimental investigation of plastic injection molding: Assessment of the effects of cavity pressure and mold temperature on the quality of the final products[J].Materials and Design,2009,30(8):3217-3224.
[5] KURT M,KAYNAK Y,KAMBER O S,et al.Influence of molding conditions on the shrinkage and roundness molded parts[J].Advanced Manufacturing Technology,2010(46):571-578.
[6] 李林楠.基于型腔压力测量的塑料注射成形过程监测[D].武汉:华中科技大学,2012:24-30.
[7] 邱斌.注射成型中保压曲线对制品表面质量的影响[J].工程塑料应用,2007,35(1):37-39.
[8] 佘少玲,许海航.模腔压力对注塑工艺参数的响应[J].番禺职业技术学院学报,2006,5(4):61-64.
[9] 吴廷,安瑛,谢鹏程,等.采用型腔压力控制转压点[J].塑料,2010,39(5):79-81.
[10] 安静.工艺参数对PS 塑料熔接痕的影响[J].上海工程技术大学学报,2012,26(1):40-44.

备注/Memo

备注/Memo:
收稿日期: 2014-03-30
通信作者: 刘斌(1972-),男,教授,主要从事数字化设计制造、模具CAD/CAM技术研究.E-mail:mold_bin@hqu.edu.cn.
基金项目: 福建省自然科学基金资助项目(2011J01314)
更新日期/Last Update: 2014-11-20