[1]张德亮,王维德,赵鹏,等.聚羧酸类减水剂活性大单体合成工艺[J].华侨大学学报(自然科学版),2012,33(4):420-424.[doi:10.11830/ISSN.1000-5013.2012.04.0420]
　ZHANG De-liang,WANG Wei-de,ZHAO Peng,et al.Research of the Synthesis Process of Polycarboxylate Water-Reducer Active Macromonomer[J].Journal of Huaqiao University(Natural Science),2012,33(4):420-424.[doi:10.11830/ISSN.1000-5013.2012.04.0420]
点击复制

聚羧酸类减水剂活性大单体合成工艺()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第33卷
期数:
2012年第4期
页码:
420-424
栏目:
出版日期:
2012-07-20

文章信息/Info

Title:
Research of the Synthesis Process of Polycarboxylate Water-Reducer Active Macromonomer
文章编号:
1000-5013(2012)04-0420-05
作者:
张德亮;  王维德;  赵鹏;  闫瑞晶
华侨大学 化工学院, 福建 厦门 361021
Author(s):
ZHANG De-liang;  WANG Wei-de;  ZHAO Peng;  YAN Rui-jing
College of Chemical Engineering, Huaqiao University, Xiamen 361021, China
关键词:
聚乙二醇单甲醚甲基丙烯酸酯;  酯化反应;  减水剂;  酯化率;  双键摩尔分数
Keywords:
methoxy polyethylene glycol methacrylate;  esterification;  water-reducer;  esterification rate;  double bond mol fraction
分类号:
TU528.042
DOI:
10.11830/ISSN.1000-5013.2012.04.0420
文献标志码:
A
摘要:
以聚乙二醇单甲醚-1200(MPEG 1200)与甲基丙烯酸(MAA)为原料,通过直接酯化反应制得聚羧酸类减水剂活性大单体聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA 1200).通过正交实验,评价酸醇摩尔比、反应温度、催化剂质量分数(以聚乙二醇单甲醚质量计)、携水剂质量分数(以反应总质量计)、阻聚剂质量分数(以甲基丙烯酸质量计)、酯化时间对酯化率和双键摩尔分数的影响,确定合成MPEGMA 1200的最佳工艺条件,即酸醇摩尔比为2.0∶1,阻聚剂质量分数为2.5%,催化剂质量分数为4%,携水剂质量分数为40%,反应温度为130 ℃,反应时间为6 h.在此条件下,其酯化率达到98.9%,双键摩尔分数为91.1%.
Abstract:
The active macromonomer, methoxy polyethylene glycol methacrylate-1200(MPEGMA 1200), used for polycarboxylate high performance water-reducer, was synthesized by direct esterification taking methacrylic acid(MAA)and methoxy polyethylene glycol-1200(MPEG 1200)as raw materials. Through the orthogonal experiments, comprehensive evaluation of mole ratio of MAA to MPEG, dosage of catalyst, polymerization inhibitor and water-carrying agent, reaction temperature and time on esterification were investigated with the esterification rate and double bond mol fraction as measurement indexes. The optimum conditions of synthesizing MPEGMA 1200 were confirmed as follows: mole ratio of MAA to MPEG was 2.0∶1, dosage of polymerization inhibitor was 2.5% of MAA quality, dosage of catalyst was 4% of MPEG quality, dosage of water-carrying agent was 40% of the total reactant quality, the reaction time was 6 h, and reaction temperature was 130 ℃. Under these conditions, the esterification rate was 98.9% and the double bond mol fraction was 91.1%.

参考文献/References:

[1] 张桂祥,黄建国.聚羧酸系高性能减水剂及其发展趋势[J].山西建筑,2010,36(12):160-161.
[2] 孙振平,赵磊.聚羧酸系减水剂大单体MPEGMA的制备[J].建筑材料学报,2009,12(1):101-105.
[3] PLANK J,P(¨overO)LLMANN K,ZOUAOUI N,et al.Synthesis and performance of methacrylic ester based polycarboxylate superplasticizers possessing hydroxy terminated poly(ethylene glycol)side chains[J].Cement and Concrete Research,2008,38(10):1210-1216.
[4] LI Chong-zhi,FENG Nai-qian,LI Yong-de,et al.Effects of polyethlene oxide chains on the performance of polycarboxylate-type water-reducers[J].Cement and Concrete Research,2005,35(5):867-873.
[5] 李崇智,冯乃谦,牛全林.聚羧酸系减水剂结构模型与高性能化分子设计[J].建筑材料学报,2004,7(2):194-201.
[6] 王国建,魏敬亮.聚羧酸盐高效减水剂的研制(Ⅰ): 大分子单体的合成与表征[J].建筑材料学报,2010,9(3):312-316.
[7] 张志贤.有机官能团定量分析[M].北京:化学工业出版社,1990:575-577.
[8] PAPAYIANNI I,TSOHOS G,OIKONOMOU N,et al.Influence of superplasticizer type and mix design parameters on the performance of them in concrete mixtures[J].Cement and Concrete Composites,2005,27(2):217-222.
[9] 罗策,张小伟,李春新,等.溶剂酯化法制备甲基丙烯酸聚乙二醇单甲醚-750酯[J].西北师范大学学报:自然科学版,2008,44(1):64-68.

相似文献/References:

[1]刘静,陈均志.SO42-/ZrO2-TiO2/La3+催化合成己二酸二辛酯[J].华侨大学学报(自然科学版),2007,28(2):162.[doi:10.3969/j.issn.1000-5013.2007.02.014]
　LIU Jing,CHEN Jun-zhi.Study on Catalytic Synthesis of Dioctyl Adipate by SO42-/ZrO2-TiO2/La3+[J].Journal of Huaqiao University(Natural Science),2007,28(4):162.[doi:10.3969/j.issn.1000-5013.2007.02.014]
[2]赵强,林金清.磺酸基功能化季铵盐离子液体催化油酸制备生物柴油[J].华侨大学学报(自然科学版),2013,34(6):662.[doi:10.11830/ISSN.1000-5013.2013.06.0662]
　ZHAO Qiang,LIN Jin-qing.Preparation of Biodiesel from Oleic Acid by Using SO3H-Functionalized Quaternary Ammonium Ionic Liquids[J].Journal of Huaqiao University(Natural Science),2013,34(4):662.[doi:10.11830/ISSN.1000-5013.2013.06.0662]

备注/Memo

备注/Memo:
收稿日期: 2011-11-21
通信作者: 王维德(1958-),男,教授,主要从事精细化工的研究.E-mail:wangwd@hqu.edu.cn.
更新日期/Last Update: 2012-07-20