[1]郑亚青.吊装绳牵引并联起重机器人的建模分析[J].华侨大学学报(自然科学版),2009,30(5):496-501.[doi:10.11830/ISSN.1000-5013.2009.05.0496]
　ZHENG Ya-qing.Modeling of A Wire-Driven Parallel Crane Robot for Containers Handling[J].Journal of Huaqiao University(Natural Science),2009,30(5):496-501.[doi:10.11830/ISSN.1000-5013.2009.05.0496]
点击复制

吊装绳牵引并联起重机器人的建模分析()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第30卷
期数:
2009年第5期
页码:
496-501
栏目:
出版日期:
2009-09-20

文章信息/Info

Title:
Modeling of A Wire-Driven Parallel Crane Robot for Containers Handling
文章编号:
1000-5013(2009)05-0496-06
作者:
郑亚青
华侨大学机电及自动化学院
Author(s):
ZHENG Ya-qing
College of Mechanical Engineering and Automation, Huaqiao University, Quanzhou 362021, China
关键词:
集装箱吊装;  轨道吊;  绳牵引;  并联;  起重机器人
Keywords:
containers handling;  rail-mounted gantry cranes;  wire-driven;  parallel;  crane robot
分类号:
TP242.2
DOI:
10.11830/ISSN.1000-5013.2009.05.0496
文献标志码:
A
摘要:
提出一种6自由度的绳牵引并联起重机器人,以取代现有的轨道吊.通过对绳牵引并联起重机器人进行构型配置并建模后发现,其动力学系统是具有8个输入量、6个状态量和输出量的冗余驱动的非线性系统.将非正则反馈线性化控制器引入到该系统中,得到一个线性化的系统.选择适当的输入控制律,即可得到一个关于轨迹误差的二阶常微分方程.在选择合适的反馈增益的基础上,可实现渐近稳定的吊运轨迹跟踪控制.仿真结果表明,吊具在x和y方向上的轨迹的稳态误差为零,但在z方向上的轨迹始终存在一个固定的稳态误差,必须通过改进系统的控制器来解决.
Abstract:
A 6-degree-of-freedom wire-driven parallel crane robot for containers handling replacing rail-mounted gantry cranes is presented.The mechanism configuration of the wire-driven parallel crane robot is given.After the modeling of the crane robot system,it is found that its dynamic modeling is a redundantly actuated nonlinear system with 8 inputs,6 states and 8 outputs.A non-regular feedback linearization controller is used to linearize the system and an ordinary differential equation about the error trajectory of the payload is obtained after the use of a suitable input control law for the linearized system,which the asymptotical stability of the trajectory tracking of the payload can be realized if the feedback gains are selected.The simulation results have shown that the steady-state errors of the tracking trajectory along x and y directions tend to zero and that along z direction keeps a constant value which should be eliminated by improving the controller.

参考文献/References:

[1] 李书梁. 轨道式集装箱门式起重机的现状 [J]. 起重运输机械, 2002(1):5-6.doi:10.3969/j.issn.1001-0785.2002.01.002.
[2] 张德文, 谢琛, 陈丽昕. 轨道式集装箱门式起重机的技术分析 [J]. 港口装卸, 2005(5):43-47.doi:10.3963/j.issn.1000-8969.2005.05.013.
[3] BOSTELMAN R V, GOODWIN K. Survey of cargo handling research relative to the mobile offshore base (MOB) needs [R]. Gaithersburg:National Institute of Standards and Technology, 1999.30-31.
[4] 胡龙, 郑亚青, 林麒. 低速风洞绳牵引并联机构的动力学分析 [J]. 华侨大学学报(自然科学版), 2008(2):184-189.
[5] ZHENG Ya-qing. Feedback linearization control of a wire-driven parallel support system in wind tunnels [A]. 山东济南, 2006.9-13.
[6] CHENG Dai-zhan, HU Xiao-ming, WANG Yu-zhen. Non-regular feedback linearization of nonlinear systems via a normal form algorithm [J]. Automatica, 2004(3):439-447.doi:10.1016/j.automatica.2003.10.014.
[7] SUN Zhen-dong, XIA Xiao-hua. On nonregular feedback linearization [J]. Automatica, 1997(7):1339-1344.doi:10.1016/S0005-1098(97)00030-7.
[8] ZHONG J, KARASALO M, CHENG D. New results on non-regular linearization of non-linear systems [J]. International Journal of Control, 2007, (10):1651-1664.doi:10.1080/00207170701481659.

备注/Memo

备注/Memo:
国家自然科学基金资助项目(50805054)
更新日期/Last Update: 2014-03-23