[1]钱庆荣,肖荔人,周丕严,等.废旧PVC塑料制备PVC沥青的研究[J].华侨大学学报(自然科学版),2008,29(1):56-60.[doi:10.11830/ISSN.1000-5013.2008.01.0056]
　QIAN Qing-rong,XIAO Li-ren,ZHOU Pi-yan,et al.Study on Preparing PVC-Dased-Pitch from Wasted PVC Plastics[J].Journal of Huaqiao University(Natural Science),2008,29(1):56-60.[doi:10.11830/ISSN.1000-5013.2008.01.0056]
点击复制

废旧PVC塑料制备PVC沥青的研究()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第29卷
期数:
2008年第1期
页码:
56-60
栏目:
出版日期:
2008-01-20

文章信息/Info

Title:
Study on Preparing PVC-Dased-Pitch from Wasted PVC Plastics
文章编号:
1000-5013(2008)01-0056-05
作者:
钱庆荣; 肖荔人; 周丕严; 黄宝铨; 符杰; 陈庆华
福建师范大学化学与材料学院; 福建师范大学化学与材料学院 福建福州350007; 福建福州350007
Author(s):
QIAN Qing-rong;  XIAO Li-ren;  ZHOU Pi-yan;  HUANG Bao-quan;  FU Jie;  CHEN Qing-hua
College of Chemistry and Materials Science, Fujian Normal University, Fuzhou 350007, China
关键词:
废旧聚氯乙烯;  脱氯化氢;  PVC沥青;  正交实验;  两阶段恒温法
Keywords:
wasted PVC plastics;  dehydrochlorination;  PVC-based pitch;  orthogonal experiment;  two phase′s isothermal method
分类号:
X705
DOI:
10.11830/ISSN.1000-5013.2008.01.0056
文献标志码:
A
摘要:
以废旧聚氯乙烯(PVC)塑料为原料,采用两阶段恒温法制备PVC沥青,通过正交实验,确定制备PVC沥青的最优条件.采用热重分析、红外光谱分析和软化点分析等测定结果,初步分析PVC沥青的形成机理.研究结果表明,对于所选择的废旧PVC塑料,第一恒温阶段主要是通过热解脱除氯化氢阶段,该阶段的最佳温度为270℃,最佳恒温保持时间为150 min,在此条件下废旧PVC塑料的HCl脱除率可高达95%.在第二恒温阶段中,脱HCl后的PVC中C=C烯烃链段结构被破坏,经氧化、交联、重整,重新形成脂肪族、芳香族类物质.该阶段的最佳温度为410℃、保持时间以120 min为宜.
Abstract:
Wasted polyvinychlorid(PVC) plastics was used as raw materials,PVC based pitch was prepared by two phase′s isothermal method; using orthogonal experiments,the pptimum preparation conditions were investigated.Thermogravimetry(TG),Fourier transform infrared(FTIR) and soften point measurement were used to discuss the mechanism of reforming PVC into pitch.The results showed that dehydrochlorination of the wasted PVC predominantly taken place in the first thermal treatment stage.Under the optimum conditions as of 270 ℃ and 150 min of retention time,the dehydrochlorination ratio is as high as 95 %.In the second thermal treatment process,dehydrochlorided PVC is preoxidated in air,the structure of C=C is destroyed,cross-linked,and reformed into alicyclic and/or aromatic compounds.The optimum conditions for the second process are: 410 ℃ of temperature with 120 min of retention time.

参考文献/References:

[1] 魏娜, 赵乃勤, 贾威. 活性炭的制备及应用新进展 [J]. 材料科学与工程学报, 2003(5):777-780.doi:10.3969/j.issn.1673-2812.2003.05.038.
[2] QIAO W M, YOON S H, KORAI Y. Preparation of activated carbon fibers from polyvinyl chloride [J]. CARBON, 2004(7):1327-1331.doi:10.1016/j.carbon.2004.01.035.
[3] QIAO W M, SONG Y, YOON S H. Preparation of PVC pitch from waste pipe [J]. Carbon, 2005(9):2022-2025.doi:10.1016/j.carbon.2005.02.032.
[4] 谢志刚, 刘成伦. 活性炭的制备及其应用进展 [J]. 工业水处理学报, 2005(7):10-17.doi:10.3969/j.issn.1005-829X.2005.07.003.
[5] 张明耀, 沈进, 赵宇. 废塑料的综合处理利用技术 [J]. 塑料工业, 2005, (z1):225-227.doi:10.3321/j.issn:1005-5770.2005.z1.065.
[6] 田原宇, 吕永康, 谢克昌. PVC的热解/红外(Py/FTIR)研究 [J]. 燃料化学学报, 2002(6):69-72.doi:10.3969/j.issn.0253-2409.2002.06.018.
[7] 朱明华. 仪器分析 [M]. 北京:高等教育出版社, 2000.286-310.
[8] 徐吉民. 正交设计的应用 [M]. 南昌:江西药学学术出版社, 1975.19-293.

备注/Memo

备注/Memo:
福建省自然科学基金资助项目(D0510016); 福建省教育厅科技计划项目(JB06079)
更新日期/Last Update: 2014-03-23