[1]刘菊东.非标准复合齿轮插齿刀设计方法[J].华侨大学学报(自然科学版),2000,21(1):61-65.[doi:10.3969/j.issn.1000-5013.2000.01.013]
　Liu Judong.On the Method of Designing Gear Sharper Cutter for the Nonstandard Composite Gear[J].Journal of Huaqiao University(Natural Science),2000,21(1):61-65.[doi:10.3969/j.issn.1000-5013.2000.01.013]
点击复制

非标准复合齿轮插齿刀设计方法()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第21卷
期数:
2000年第1期
页码:
61-65
栏目:
出版日期:
2000-01-20

文章信息/Info

Title:
On the Method of Designing Gear Sharper Cutter for the Nonstandard Composite Gear
文章编号:
1000-5013(2000)01-0061-05
作者:
刘菊东
集美大学机电工程系, 厦门361021
Author(s):
Liu Judong
Dept. of Electromech. Eng., Jimei Univ., 361021, Xiamen
关键词:
非标准复合齿轮;  插齿刀;  设计
Keywords:
nonstandard composite gear;  gear sharper cutter;  design
分类号:
TG721
DOI:
10.3969/j.issn.1000-5013.2000.01.013
摘要:
研究加工不等齿厚的非标准参数渐开线齿形,与非渐开线齿形复合的锁闭齿轮插齿刀刀齿的排列、刀具齿数的选择以及刀具设计的基本方法,介绍用限制区域选择插齿刀变位系数的新方法,并给出刀具齿顶后角与侧螺旋角的关系曲线,为插齿刀参数的选择提供依据 .结果表明,采用上述方法设计非标准复合齿轮插齿刀,可简化计算和提高设计效率 .
Abstract:
For cutting the composite lock gear with unequal tooth thickness, a study is made on the design method of gear sharper cutter with nonstandard parameter involute tooth profile and noninvolute tooth profile. The cutter tooth arrangement, the choice of teeth number of the cutter and the basic method of cutter design are discussed; and a new method of choosing deflection factor by using limited area is presented. And the curve of relationship between rear angle on tooth crest and helical angle on tooth side of the cutter is given so as to give a basis for the gear sharper cutter to choose its parameters. To design nonstandard gear sharper cutter by adopting the method mentioned above will simplify the calculation and will increase the efficiency of design.

参考文献/References:

[1] 吴泽林. 加工齿厚不一致齿轮的插齿刀设计 [J]. 工具技术, 1997(4):13-16.
[2] 刘菊东. 外插齿刀设计的新方法 [J]. 集美大学学报(自然科学版), 1999(4):29-34.
[3] 袁哲俊, 刘华明, 唐宜胜. 齿轮刀具设计 [M]. 北京:新时代出版社, 1983.125-174.

更新日期/Last Update: 2014-03-23