[1]张家冰,苏溪泉,张宗欣.用PLC实现对板材锯石机的控制[J].华侨大学学报(自然科学版),1999,20(3):295-299.[doi:10.11830/ISSN.1000-5013.1999.03.0295]
　Zhang Jiabing,Su Xiquan,Zhang Zongxin.Realizing the Control of Stone Plate Cutter by a Programmable Logical Controller[J].Journal of Huaqiao University(Natural Science),1999,20(3):295-299.[doi:10.11830/ISSN.1000-5013.1999.03.0295]
点击复制

用PLC实现对板材锯石机的控制()
分享到：

《华侨大学学报（自然科学版）》[ISSN:1000-5013/CN:35-1079/N]

卷:
第20卷
期数:
1999年第3期
页码:
295-299
栏目:
出版日期:
1999-07-20

文章信息/Info

Title:
Realizing the Control of Stone Plate Cutter by a Programmable Logical Controller
作者:
张家冰; 苏溪泉; 张宗欣
华侨大学电子工程系
Author(s):
Zhang Jiabing;  Su Xiquan;  Zhang Zongxin
关键词:
锯石机;  可编程控制器;  梯形图
Keywords:
stone cutter;  programmable controller;  trapezoidal pattern
分类号:
TU632
DOI:
10.11830/ISSN.1000-5013.1999.03.0295
摘要:
采用PLC两个移位寄存器交换工作,实现板材切割过程的控制.应用PLC的高速计数端,实现板片厚度测量和自动控制.利用PLC的跳转指令,实现手动工作方式和自动工作方式的切换.文中给出系统自动程序流程图和梯形图.本控制器具有可靠性高、抗干扰能力强、编程简单、接线方便、板片误差小(＜±0.2mm)等优点,适合在设计新型锯石机或改造旧锯石机上应用.
Abstract:
For realizing the control of the cutting process of stone plate by a programmable logical controller (PLC), two registers of PLC are adopted to exchange jobs; a high speed contact or counting terminal on PLC is applied in realizing measurement of the thic

相似文献/References:

[1]张宗欣.板材锯石机PC控制过程设计[J].华侨大学学报(自然科学版),1995,16(1):94.[doi:10.11830/ISSN.1000-5013.1995.01.0094]
　Zhang Zongxin.Process Design Controlled by Programmable Controller for the Use of Stone Plate Cutter[J].Journal of Huaqiao University(Natural Science),1995,16(3):94.[doi:10.11830/ISSN.1000-5013.1995.01.0094]
[2]张家冰,苏溪泉,张宗欣.辊道窑磁砖生产线PLC控制[J].华侨大学学报(自然科学版),1999,20(4):419.[doi:10.11830/ISSN.1000-5013.1999.04.0419]
　Zhang Jiabing,Su Xiquan,Zhang Zongxin.Control of Programmable Controller (PLC) on the Tile Production Line of Roll Way Kiln[J].Journal of Huaqiao University(Natural Science),1999,20(3):419.[doi:10.11830/ISSN.1000-5013.1999.04.0419]
[3]周平.直缝焊管自动超声探伤系统设计[J].华侨大学学报(自然科学版),2016,37(2):145.[doi:10.11830/ISSN.1000-5013.2016.02.0145]
　ZHOU Ping.Design of Automatic Ultrasonic Inspection System of Longitudinal Welded Pipe[J].Journal of Huaqiao University(Natural Science),2016,37(3):145.[doi:10.11830/ISSN.1000-5013.2016.02.0145]
[4]李双,李钟慎.全自动簧片铆接生产线的设计[J].华侨大学学报(自然科学版),2017,38(2):153.[doi:10.11830/ISSN.1000-5013.201702004]
　LI Shuang,LI Zhongshen.Design of Automatic Production Line for Reed Riveting[J].Journal of Huaqiao University(Natural Science),2017,38(3):153.[doi:10.11830/ISSN.1000-5013.201702004]

更新日期/Last Update: 2014-03-22